Tag Archives: Whats New

RIFF JTAG – RIFF JTAG Manager v1.27, RIFF Box Firmware v1.19

Posted on by

10.03.2011   RIFF JTAG Manager v1.27, RIFF Box Firmware v1.19

Whats new :

RIFF JTAG Manager v1.27

  • Fixed access violation bug upon JTAG Manager startup if there is no RIFF Box detected and Cancel button is clicked.
  • (SDK): more functions are now available (exported) for future Resurrector DLLs;
  • Added flags for JTAG Manager to be able to retrieve memory chip size from the DCC Loader.
  • Fixed initialization bug for NOR-related DCC Loadererss
  • ScriptEngine: added options pocessing ‘/byte’, ‘/word’, ‘/long’ to data.save.binary instruction: thus it’s possible now to read memory through script  using desired bus access width (8-,16-, or 32-bit widths).  For example: “data.save.binary c:\myfile.bin 0x00..0x11FF /word” – will read 0x1200 bytes from memory into myfile.bin file starting from address 0x00 using 16-bit bus accesses.

Note: “Read Memory” button on the JTAG Read/Write page reads memory using 32-bit bus accesses only.

RIFF Box Firmware v1.19

  • Added more H/W script (*.has) instructions;
  • Added HTC security processing functions;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – JTAG Manager v1.20, RIFF Box firmware v1.16 released

Posted on by

16.12.2010  JTAG Manager v1.20, RIFF Box firmware v1.16 released

Whats new :

JTAG Manager 1.20

– added 4.2V power supply output (RIFF RJ45 pin 1) controlling feature
For this go to DCC Read/Write page, click “Notifications…”, the Notifications dialog will be displayed,
go to “For Advanced Users” page and set desired mode for “Enable 4.2V output” checkbox.
When enabled, 4.2V line will be powered on after any “JTAG” operation executed and will remain “ON” until
box restart or until “Enable 4.2V output” checkbox is unchecked and any “JTAG” operation is executed.
– (SDK): exported new SUB_ID_GET_ROM_INFO function for resurrectors;

Firmware 1.16

– code is optimized to avoid deadlocks in ARM11 handling routines;
– reset sequence (after NRST assertion) is optimized for ARM11 core;
– added 4.2V power supply output (RIFF RJ45 pin 1) controlling feature

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new files, download it and restart the software.

RIFF Box JTAG Manager Version 1.17- JTAG Pins Detection added, WORLD FIRST

Posted on by

14.10.2010 RIFF JTAG Manager v1.17 released

Whats new :

  • Addedd chip size information handling for NOR memories
  • Improved erase operation in case DCC Loader operates with a NOR memory.
  • Implemented ResBreak option (SYSTEM.OPTION RESBREAK ON|OFF) in the Trace32 CMM execution engine
  • Added PROBE feature – Detection of JTAG Pins ! ! !

Probing function work via Pin 6 on RJ45 Port :

Advanced users should read the probing manual from here.

Probe dialog example :

_____________________________

RIFF Box firmware v1.15 :

– Probe (JTAG Pins detection) feature added

RIFF JTAG – HTC Desire with SLCD , Direct Unlock update

Posted on by

20.09.2010 – HTC Desire new revision boards supported!

Whats new:

  • Added optional selection for SPL versions
  • Added direct Unlock function without SPL reflashing

As already noted before, the HTC Desire is being shipped now with SLCD display type, instead of previous AMOLED.
Now You can chose SPL version to be used, 0.80.0000, or 0.92.0007. Latest SPL supports both display types, but at the moment this SPL isn’t rooted as we know.

Here is how it works now:

If You want just to repair the SPL, Untick the IMEI and HTC Partition check boxes.
If phone IMEI or eeprom is damaged, You need to tick the HTC Partition and IMEI check boxes, and of course fill out the desired IMEI.

If You just want to unlock phone, without any other changes, select “Unlock Settings” TAB and press “Unlock” button:

This function will unlock the phone without touching any other memory part.

RIFF JTAG – JTAG Manager v1.14 released

Posted on by

02.09.2010 JTAG Manager v1.14 released
Whats new:

JTAG Manger 1.14
———————
– Increased internal buffers size to support NAND devices with 4KB/256KB Page/Block size which makes possible now to run Samsung S8500 fully functional resurrector;

– Added OneNAND 2K/4K pages size selection for DCC Loader setup in Custom Target Settings mode; (make sure you use latest OneNAND standalone DCC loaders; old OneNAND loaders may not start on the 1.14 JTAG Manager version);

– Fixed: now OneNAND settings (in DCC Loader Settings) are not discarded to defaults on next software startup.

– Improved presets loading sequence; – (SDK): exported new SUB_ID_SET_JTAG_SPEED function for resurrectors; Please click “Check for updates” button to download new version.

RIFF JTAG – JTAG Manager v1.13, JTAG Firmware v1.13 released

Posted on by

27.08.2010 JTAG Manager v1.13, JTAG Firmware v1.13 released

Whats new:

JTAG Manger 1.13
———————
– Added feature to display FLASH chip capacity information
– Added feature ‘Auto FullFlash size’ to DCC Read/Write page for simplified Full Images reading/writting
– Fixed DCC Loader Settings dialog
– Added resurrector interface function ‘GetChipSize’ which now enables resurrector DLL to receive target’s memory size
for proper data selection for flashing (like in Huawei Modem E1550 64/128MB versions);

Firmware 1.13
———————
– fixed ARM9 core debug capabilities when core is in Thumb mode
(when ARM9 core was entering debug from Thumb state some CPSR register’s flags were lost, same was when core was leaving debug into Thumb mode);
– FFFFFFEE instruction was added into HAS scripts processing module;

Click “Check for Updates” button to download new JTAG Manager and JTAG firmware.

14.07.2010 – JTAG Manager v1.11 for RIFF Box released

Posted on by

14.07.2010 – JTAG Manager v1.11 for RIFF Box released
Whats new:
  • Added support for HTC Phones dead boot repair
  • Added RIFF Box firmware v1.11
  • Added HTC DIAMOND DLL with pinout and IMEI repair
  • Added HTC HD2 LEO DLL with pinout and IMEI repair
  • Added HTC Magic 32A DLL with pinout and IMEI repair
  • Added HTC Magic 32B DLL with pinout and IMEI repair
Please run JTAG Manager and click “Check for updates” button. You’ll have list of new files, which will be downloaded.
READ THE MANUAL before starting with repair, and make sure You have updated RIFF box firmware !
Box info should show this :
Code:
Open serial port…OK
Connecting to the RIFF Box…OK
Getting RIFF Box Info…OK
RIFF Box S/N: FF.FFFF:FFFF-FFFF:FFFF
RIFF Box Firmware Version: 1.11
Pinout photo is available once You select desired model. Button “Interface Pinout” will apear.
Repair manual You can read if You click “Resurrection Help” button.
Keep on Rockin’ in the free world 🙂