23.11.2012   RIFF JTAG – Samsung SGH-Z710 Unbrick – Dead Boot Repair Supported

Repairing bricked Samsung Z710 is easy with the RIFF Box.

To resurrect Samsung Z710:

•  Solder JTAG cable to Samsung Z710 JTAG pads;
•  Connect USB cable or instert batteryu;
•  Make sure Samsung Z710 is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold ‘9’ key and press ‘Power ON’ button.

.