Tag Archives: Riff

RIFF JTAG – QUALCOM NAND ESM7XXX Generic DLL released

Posted on by

04.03.2011  QUALCOM NAND ESM7XXX Generic DLL released

Resurrector ESM7XXX L41 D04 contains only DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.

Embedded DCC Loader is designed to work inside of MCU’s internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.

Initial H/W init sequence will setup MCU’s PLL0 with these parameters:

* L/M/N = 0x41/0x00/0x01;
* Global Clock Divisor = DIV4

If you don’t know what the L, M, N or Global Clock Divisor parameters are, then just keep in mind:

* Highest L values and lowest Global Clock Divisor values will make maximum clocking frequency supplied to the MCU’s core and thus DCC Read/Write speed will be maximum fast;

* Too high frequency supplied to the MCU’s core may result in core overheating or instable operation;

RIFF JTAG – Samsung G800 Unbrick, dead boot repair supported

Posted on by

04.03.2011   Samsung G800 Unbrick, dead boot repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_G800.dll” contains pinout, instructions and required repair files for Samsung G800 Unbrick, dead boot repair.

RIFF JTAG – ZTE MF180S Broadband modem Unbrick/Repair supported

Posted on by

03.03.2011   ZTE MF180S Broadband modem Unbrick/Repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_MF180S.dll” contains pinout, instructions and required repair files for ZTE MF180S Broadband modem Unbrick/Repair boot.

RIFF JTAG – HTC P3300 (HTC Artemis 100) Unbrick – Boot Repair Supported

Posted on by

18.02.2011  HTC P3300 (HTC Artemis 100) Unbrick – Boot Repair Supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Artemis.dll” contains pinout, instructions and required repair files for HTC P3300 (HTC Artemis 100) Unbrick – Boot Repair.

RIFF JTAG – HTC P3400 (HTC Gene 100) Unbrick – Boot repair supported

Posted on by

17.02.2011    HTC P3400 (HTC Gene 100) Unbrick – Boot repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Gene.dll” contains pinout, instructions and required repair files for HTC P3400 (HTC Gene 100) Unbrick – Boot repair.

RIFF JTAG – Atmel AT91SAM9263-EK NAND Interface supported

Posted on by

16.02.2011   Atmel AT91SAM9263-EK NAND Interface supported

Resurrector AT91SAM9263-EK contains only DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.

Embedded DCC Loader is designed to work inside of ATMEL AT91SAM9263 MCU’s internal RAM memory.
Loader has full (read/write) access to AT91SAM9263-EK evaluation board’s NAND memory.

Currently only the 8-bit NAND interface is implemented.

RIFF JTAG – HTC HD7 Unbrick, Unlock, IMEI Repair and CID Update supported

Posted on by

16.02.2011   HTC HD7 Unbrick, Unlock, IMEI Repair and CID Update supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_HD7.dll” contains pinout, instructions and required repair files for HTC HD7 Unbrick, Unlock, IMEI Repair and CID Update.

RIFF JTAG – CDMA Huawei C2906 Boot repair supported

Posted on by

16.02.2011   CDMA Huawei C2906 Boot repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_C2906.dll” contains pinout, instructions and required repair files for CDMA Huawei C2906 Boot repair, and NOR flash read/write operations.

RIFF JTAG – LG P500 Optimus One Unbrick, Dead boot repair supported

Posted on by

10.02.2011   LG P500 Optimus One Unbrick, Dead boot repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“LG_P500.dll” contains pinout, instructions and required repair files for LG P500 Optimus One Unbrick, Dead boot repair.

RIFF JTAG – RIFF JTAG Manager v1.24, RIFF Box Firmware v1.18 released

Posted on by

10.02.2011 RIFF JTAG Manager v1.24, RIFF Box Firmware v1.18

Firmware 1.18
—————————
– PXA270 debug is now available in ARM/Thumb modes (use the GDBServer for this);

JTAG Manager 1.24
—————————
– In case when Resurrector has no DCC Loader the JTAG Manager will now report it correctly and will not allow DCC Read/Write features
– (SDK): more functions are now available (exported) for future Resurrector DLLs;
– Usefull Plugins Enabled
—————————

Qualcom FullFlash Image Processing Tool:

This plugin works with NAND image files which have generic Qualcomm layout

With help of this plugin you can do:
– Disassemble a full NAND image file previously obtained with JTAG Manager (DCC Read/Write Page);
– Inspect each partition contents (main zone and spare zone) simultaneously;
– Save separate partitions to HDD (only main zone, only spare zone, or both zones);
– Write a chosen partition directly into phone;
– Read a chosen partition directly from the phone and substitute old partition contents to new ones;

Please note, direct read/write operations from/to the phone will require proper resurrector to be set (Resurrector Settings: thus before clicking the Activate Plugin button make sure compatible model is selected as well as other settings like TCK/RTCK frequencies).

You can access it from “Usefull Plugins” TAB :