Tag Archives: Pc Battery

RIFF JTAG – RoverPC EVO V7 Unbrick – Dead boot repair supported

Posted on by

21.03.2011  RoverPC EVO V7 Unbrick – Dead boot repair supported

RoverPC Evo V7 resurrection is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.

To resurrect RoverPC Evo V7:

  • Solder JTAG cable to RoverPC Evo V7 JTAG pads;
  • Connect USB cable to phone and PC;
  • Make sure RoverPC Evo V7 is selected in the list of models;
  • Make sure a fixed TCK frequency is selected;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original firmware downloader software to restore it to the working state.

To enter download mode:

  • Disconnect PC cable;
  • Insert battery;
  • Hold both ‘Volume Down’ and ‘Camera’ keys and press Power-On.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – CDMA Huawei C5005 Unbrick – Repair supported

Posted on by

11.03.2011  CDMA Huawei C5005 Unbrick – Repair supported

Resurrecting Huawei C5005 is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Resurrector re-flashes only firmware zone of the phone (0x000000 to 0xBFFFFF).

To resurrect Huawei C5005:

  • Solder JTAG cable to Huawei C5005 JTAG pads;
  • Insert USB Data cable into board and PC;
  • Make sure Huawei C5005 is selected in the list of models;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • De-solder JTAG wires;

 

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – CDMA ZTE F285 Repair supported

Posted on by

10.03.2011 CDMA ZTE F285 Repair supported

Resurrecting ZTE F285 is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board. Resurrector re-flashes only firmware zone of the phone (0x000000 to 0x60FFFF).
To resurrect ZTE F285:

  • Solder JTAG cable to ZTE F285 JTAG pads;
  • Insert USB Data cable into board and PC;
  • Make sure ZTE F285 is selected in the list of models;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.