Tag Archives: Models

RIFF JTAG – LG F-160L Optimus LTE2 Unbrick – Dead Boot Repair Supported

Posted on by

09.11.2012  RIFF JTAG – LG F-160L Optimus LTE2 Unbrick – Dead Boot Repair Supported

Repairing bricked LG F160L is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG F160L:

  •  Solder JTAG cable to LG F160L JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG F160L is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
.

RIFF JTAG – LG F-160K Optimus LTE2 Unbrick – Dead Boot Repair Supported

Posted on by

09.11.2012   RIFF JTAG – LG F-160K Optimus LTE2 Unbrick – Dead Boot Repair Supported

Repairing bricked LG F160K is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG F160K:

  •  Solder JTAG cable to LG F160K JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG F160K is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
.

RIFF JTAG – Pantech Sky Vega LTE EX IM-A820L Ubrick – Dead Boot Repair Supported

Posted on by

08.11.2012  RIFF JTAG – Pantech Sky Vega LTE EX IM-A820L Ubrick – Dead Boot Repair Supported

Repairing bricked Pantech Sky IM-A820L is easy with the RIFF Box.
To resurrect Pantech Sky IM-A820L:

  • Solder JTAG cable to Pantech Sky IM-A820L  JTAG pads;
  • Insert Pantech Sky IM-A820L into any USB port for power;
  • Make surePantech Sky IM-A820L is selected in the list of models;
  • Click Resurrect button;
  • Select areas to be repaired in the settings window;
  • Wait till software signals a successful operation completion;
  • De-solder JTAG wires;

Now phone can enter fastboot mode and flashed with original flasher.
,

RIFF JTAG – Pantech Sky Vega LTE IM-A800s Unbrick – Dead Boot Repair Supported

Posted on by

08.11.2012  RIFF JTAG – Pantech Sky Vega LTE IM-A800s Unbrick – Dead Boot Repair Supported

Repairing bricked Pantech A800S is easy with the RIFF Box.

To resurrect Pantech A800S:

  •  Solder JTAG cable to Pantech A800S JTAG pads;
  •  Insert Pantech A800S into any USB port for power;
  •  Make sure Pantech A800S is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now phone can enter fastboot mode and flashed with original flasher.
.

RIFF JTAG – Pantech SKY Vega RACER IM-A760S Unbrick – Dead Boot Repair Supported

Posted on by

08.11.2012  RIFF JTAG – Pantech SKY Vega RACER IM-A760S Unbrick – Dead Boot Repair Supported

Repairing bricked Pantech A760S is easy with the RIFF Box.

To resurrect Pantech A760S:

  •  Solder JTAG cable to Pantech A760S JTAG pads;
  •  Insert Pantech A760S into any USB port for power;
  •  Make sure Pantech A760S is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now phone can enter fastboot mode and flashed with original flasher.
.

RIFF JTAG – Pantech Sky Vega T100K Unbrick – Dead Boot Repair Supported

Posted on by

08.11.2012  RIFF JTAG – Pantech Sky Vega T100K Unbrick – Dead Boot Repair Supported

Repairing bricked Pantech T100K is easy with the RIFF Box.

To resurrect Pantech T100K:

  •  Solder JTAG cable to Pantech T100K JTAG pads;
  •  Insert Pantech T100K into any USB port for power;
  •  Make sure Pantech T100K is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now phone can enter fastboot mode and flashed with original flasher.
.

RIFF JTAG – LG C660 Optimus Pro Unbrick – Dead Boot Repair Supported

Posted on by

08.11.2012 RIFF JTAG – LG C660 Optimus Pro Unbrick – Dead Boot Repair Supported

Repairing bricked LG C660H is easy with the RIFF Box. But it requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).

To resurrect LG C660H:

  •  Solder JTAG cable to LG C660H JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG C660H is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – HTC Flyer 4G P515E Unbrick, IMEI, SuperCID, ModelID repair supported

Posted on by

02.11.2012   RIFF JTAG – HTC Flyer 4G P515E Unbrick, IMEI, SuperCID, ModelID repair supported

Repairing bricked HTC Flyer4G (PG4130000) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected. Please note, battery presense is required.
Some (or all) revisions of HTC Flyer4G (PG4130000) boards have JTAG interface disabled (that is enable MARM JTAG Fuse is blown in the MSM chip). In this case the JTAG may be enabled only by firmware itself. This is done by the DBL loader, so if DBL area is damanged and MCU has JTAG Disable FUSE blown then there is no way to resurrect your phone via JTAG interface. However, in this case you may use HTC Flyer4G (PG4130000) USB DLL version which does not require JTAG interface and does resurrection procedure via USB cable.
Resurrector will reflash radio’s boot zone (except DBL area) and will re-write PDA’s SPL to 1.14.0001 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG413****’.

To resurrect HTC Flyer:

  •  Solder JTAG cable to HTC Flyer JTAG pads;
  •  Insert battery and connect USB Data cable;
  •  Make sure HTC Flyer4G (PG4130000) is selected in the list of models;
  •  If you use only battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods. You can use CWM recovery to flash any ZIP file – for this during resurrection add BOOT & RECOVERY zones to be resurrected too.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

RIFF JTAG – Alcatel OT990 Unbrick – Dead Boot Repair Supported

Posted on by

02.11.2012  RIFF JTAG – Alcatel OT990 Unbrick – Dead Boot Repair Supported

Repairing bricked Alcatel OT990 is easy with the RIFF Box. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; moreover, if you’ll get connection errors, battery is not recommended at all.

To resurrect Alcatel OT990:

  •  Solder JTAG cable to Alcatel OT990 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Alcatel OT990 is selected in the list of models;
  •  Click Resurrect button;
  •  Choose which areas to flash;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

.

RIFF JTAG – Samsung GT-S6802 Galaxy Ace Duos Unbrick – Dead Boot Repair Supported

Posted on by

02.11.2012   RIFF JTAG – Samsung GT-S6802 Galaxy Ace Duos Unbrick – Dead Boot Repair Supported

Repairing bricked Samsung S6802 is easy with the RIFF Box. Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect Samsung S6802:

  •  Solder JTAG cable to Samsung S6802 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Samsung S6802 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

.