Tag Archives: Lumia

RIFF JTAG – Easy repair Nokia Lumia 820 Supported

Posted on by

19.10.2013   RIFF JTAG – Easy repair Nokia Lumia 820 Supported

Repairing bricked Nokia Lumia 820 is easy with the RIFF Box.

To resurrect Nokia Lumia 820:

  •  Solder JTAG cable to Nokia Lumia 820 JTAG pads;
  •  Insert batter and connect USB Data cable;
  •  Make sure Nokia Lumia 820 is selected in the list of models;
  •  If you use only battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
.
nokia_lumia_820_2

RIFF JTAG – Easy repair Nokia Lumia 620 supported

Posted on by

19.10.2013   RIFF JTAG – Easy repair Nokia Lumia 620 supported

Repairing bricked Nokia Lumia 620 is easy with the RIFF Box.

To resurrect Nokia Lumia 620:

  •  Solder JTAG cable to Nokia Lumia 620 JTAG pads;
  •  Insert batter and connect USB Data cable;
  •  Make sure Nokia Lumia 620 is selected in the list of models;
  •  If you use only battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
.
nokia_lumia_620_2

RIFF JTAG – Nokia Lumia 610 Unbrick – Dead Boot repair supported

Posted on by

25.01.2013   RIFF JTAG – Nokia Lumia 610 Unbrick – Dead Boot repair supported

Repairing bricked Nokia Lumia 610 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect Nokia Lumia 610:

  •  Solder JTAG cable to Nokia Lumia 610 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Nokia Lumia 610 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
nokia_lumia_610