Tag Archives: JTAG

RIFF JTAG – QUALCOMM MDM6600 Generic DLL released

Posted on by

19.11.2011  – QUALCOMM MDM6600 NAND Generic DLL released

Whats new:

  • QUALCOMM MDM6600 NAND DLL

Use this for phones which have MDM6600 in baseband – eg LG P999, iPhone 4s, and many other phones which use TEGRA2 AP CPU.

 

  • QUALCOMM MSM7227 OneNAND DLL (2kb page)
  • QUALCOMM MSM7227 OneNAND DLL (4kb page)
  • QUALCOMM QSC6xxx OneNAND DLL

All other QUALCOMM Generic DLL-s are now under same branch, so here is full revised list :

 

  • ESM7xxx L41 D04 NAND
  • MDM6600 NAND
  • MSM6xxx L06 D02 NAND
  • MSM7227 L41 D08 OneNAND
  • MSM7227 L41 D08 OneNAND 4k
  • MSM7xxx L41 D04 NAND
  • MSM7xxx L41 D08 NAND
  • QSC1100 x14 NOR
  • QSC60xx L18 D08 NOR
  • QSC6xx L20 D08 NOR
  • QSC60xx L24 D08 NOR
  • QSC6xxx L32 D08 NAND
  • QSC6xxx L36 D08 NAND
  • QSC6xxx L36 D08 OneNAND
  • QSD8xxx L41 D04 NAND
Press “Check for updates” button in order to download and install new files.

RIFF JTAG – Unlock/IMEI/TA repair – SonyEricsson x8, x10, x10 Mini, x10 mini pro (e15, e10,u20 etc)

Posted on by

11.11.2011    Unlock/IMEI/TA repair –  SonyEricsson x8, x10, x10 Mini, x10 mini pro (e15, e10,u20 etc)

Resurrecting SonyEricsson phones is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted.

With current resurrector you can choose Unlock or Resurrection operation to perform. During resurrection, you can select which areas to be repaired. Please note, in some cases phone reports failure during firmware update: in this case you may need to select option to erase Modem SW zone during resurrection.

Example :

During Unlock operation full backup of relevant zones is made, thus you have no risk killing your phone permanently – you have always an option to restore your phone to its original condition with the backup file. Backup files are created in JTAG Manager root directory, in the folder ‘BackupFiles’.

Example :

RIFF JTAG – JTAG Manager v1.37, RIFF Box firmware v1.28 released

Posted on by

11.11.2011      JTAG Manager v1.37, RIFF Box firmware v1.28 released

Whats new :

JTAG Manager 1.37
—————————

  • Fixed bug which caused not to report improper firmware version of riff box
  • (SDK): more functions are now available (exported) for future Resurrector DLLs;

Firmware 1.28
—————————

  • Added few more H/W script (*.has) instructions;
  • Added some security extensions for Xperia repair;

RIFF JTAG – JTAG Manager v1.35 released

Posted on by

04.08.2011   JTAG Manager v1.35 released

Whats new:

  • Added an arbitrary feature “Settings by Code” to the DCC Read/Write page.

Main purpose is to improve support quality for users: via “Settings Code” string a supporter person sees all settings which were set by user on the DCC Read/Write page.
Though, end-user may benefit from this too: Use “Settings Code” string for JTAG Manager to automatically setup all DCC Read/Write settings

  •  Fixed data loss during read and save operations in case there is not enough disk space available to store required amount of data.

(for example reading full on DCC Read/Write page, or saving read full, etc).
Now available disk space checks are performed prior disk write operations.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – CDMA day again, 3 new models supported

Posted on by

22.06.2011  CDMA day again, 3 new models supported

Whats new:

  • Motorola W200 full support
  • Huawei C2801 full support
  • Nokia 1006   full support

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – JTAG Manager v1.33, RIFF Box firmware v1.25 released

Posted on by

RIFF Box Firmware 1.25
—————————

  • Added 5.0V USB Power On/Off controlling feature
  • Changed sequence for 32-bit write accesses for ARM11 core (MSM8xxx support)

JTAG Manager 1.33
—————————

  • Improved connection policy:
  • Resurrection/DCC connection to device is implemented in such way that JTAG speed changes have 2 stages – booting stage and working stage.
    Booting stage is the one from the connection start and until the DCC Loader upload is complete. Booting TCK/RTCK speed are setup by JTAG Manager no matter what are the TCK settings by user (JTAG TCK Speed field in the JTAG Manager). Booting speed is hardcoded in the DLL.
    After “booting” stage is complete, the “working” speed is set – the one which is selected by user in the JTAG TCK Speed field.
    If Booting Speed in resurrector DLL is hardcoded as ‘RTCK’ the JTAG Manager would always use RTCK mode during booting stage.
  • Now policy is changed that is when user selects a fixed TCK frequency the JTAG Manager will automatically change booting speed to the fixed TCK too.
  • Fixed bug: if “Use End Address” and “AutoFull Flash Size” were checked there was error setting valid length to read.
  • For Advanced Users: advanced settings are now moved from the DCC Read/Write page (“Notifications…”) into separate button on Box Service page (Advanced Settings button)
  • Added 5.0V USB Power On/Off controlling feature
  • For this go to Box Service page, click Advanced Settings: the Notifications dialog will be displayed, go to “Advanced Settings” page and set desired mode for “Enable 5.0V output” checkbox.
  • When enabled, 5.0V power will be on after any “JTAG” operation executed and will remain “ON” until box restart or until “Enable 5.0V output” checkbox is unchecked and any “JTAG” operation is executed.
  • Added optimization for flashing memory devices which are sector-based (like MDOC H3 or MMC/SD memory cards) if error code 0x3C (write-protect) is received no recover attempts are made.

RIFF JTAG – More CDMA Models, new bug fix updates today

Posted on by

10.06.2011  More CDMA Models, new bug fix updates today

Whats new :

CDMA  Models JTAG support :

  • Huawei C2605
  • Micromax  MMX 250C
  • ZTE  WP829
  • LG RD3640

Bug fix updates :

  • Samsung S5830
  • HTC Incredible C

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – More CDMA Models, Samsung S5250 Unbrick supported

Posted on by

29.05.2011   More CDMA Models, Samsung S5250 Unbrick supported

New CDMA models added today :

  • ZTE S160
  • Unicare  UN510BF
  • Unicare ChivaC2
  • Huawei C5100

Samsung phones :

  • Samsung S5250
  • Samsung S5260 (Bug Fix)

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – CDMA Day Again :) More power for Indian users !

Posted on by

09.05.2011  RIFF JTAG – CDMA Day Again 🙂 More power for Indian users !

Whats new:

Added Huawei CDMA models support :

  • Huawei C2823 Repair, Read/Write NOR flash
  • Huawei C2809 Repair, Read/Write NOR flash
  • Huawei C2808 Repair, Read/Write NOR flash
  • Huawei C2807 Repair, Read/Write NOR flash
  • Huawei C2607 Repair, Read/Write NOR flash
  • Huawei C2905 Repair, Read/Write NOR flash

Added ZTE CDMA Model :

  • ZTE C335  Repair, Read/Write NOR flash

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – JTAG Manager v1.31, RIFF Box Firmware v1.23 released

Posted on by

20.04.2011 JTAG Manager v1.31, RIFF Box Firmware v1.23 released

Whats new :

JTAG Manager 1.31

  • “RUN/STOP” Loaders functionality is added (and alternative to the DCC Loaders)

This is required for some ARM7 cores when Debug Communication Channel (DCC) to/from core is not functional (like in MSM6000)

Firmware 1.23

  • Added 8/16/32-bit bus read/write access rotuines for ARM7 core
  • ARM7 debug is now available in ARM/Thumb modes (use the GDBServer for this);

 

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.