Tag Archives: Jtag Cable

RIFF JTAG – Samsung GT-i9020A Nexus S Unbrick – Dead Boot repair supported

Posted on by

08.12.2012 RIFF JTAG – Samsung GT-i9020A Nexus S Unbrick – Dead Boot repair supported

Repairing bricked Samsung I9020A is easy with the RIFF Box. The phone is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in very rare cases it is possible that you will have to hold Power On key during initial connection.

To resurrect Samsung I9020A:

  •  Solder JTAG cable to Samsung I9020A JTAG pads;
  •  Connect microUSB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I9020A is selected in the list of models;
  •  Make sure a fixed TCK frequency is selected;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

RIFF JTAG – Samsung GT-i9020T Nexus S Unbrick – Dead Boot repair supported

Posted on by

08.12.2012  RIFF JTAG – Samsung GT-i9020T Nexus S Unbrick – Dead Boot repair supported

Repairing bricked Samsung I9020T is easy with the RIFF Box. The phone is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in very rare cases it is possible that you will have to hold Power On key during initial connection.

To resurrect Samsung I9020T:

  •  Solder JTAG cable to Samsung I9020T JTAG pads;
  •  Connect microUSB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I9020T is selected in the list of models;
  •  Make sure a fixed TCK frequency is selected;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

RIFF JTAG – Pantech SKY VEGA S5 A840S Unbrick – Dead Boot repair supported

Posted on by

RIFF JTAG – Pantech SKY VEGA S5 A840S Unbrick – Dead Boot repair supported

 

Repairing bricked Pantech A840S is easy with the RIFF Box.

To resurrect Pantech A840S:

  •  Solder JTAG cable to Pantech A840S JTAG pads;
  •  Insert Pantech A840S into any USB port for power;
  •  Make sure Pantech A840S is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

.

RIFF JTAG – Samsung SCH-i509 Galaxy Y Unbrick – Dead Boot repair supported

Posted on by

30.11.2012  RIFF JTAG – Samsung SCH-i509 Galaxy Y Unbrick – Dead Boot repair supported

Repairing bricked Samsung I509 is easy with the RIFF Box.To power the phone connect USB cable and insert battery. Sometimes it’s needed to press and HOLD Power On key.

To resurrect Samsung I509:

  •  Solder JTAG cable to Samsung I509 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I509 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

.

RIFF JTAG – Samsung SC-05D Galaxy Note LTE Unbrick – Dead Boot repair supported

Posted on by

29.11.2012    RIFF JTAG – Samsung SC-05D Galaxy Note LTE Unbrick – Dead Boot repair supported

Repairing bricked Samsung SC-05D is easy with the RIFF Box. The device is based on the Qualcomm APQ8060 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung SC-05D:

  •  Solder JTAG cable to Samsung SC-05D JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung SC-05D is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.

RIFF JTAG – Samsung GT-N8010 Galaxy Note 10.1 WiFi Unbrick – Dead Boot repair supported

Posted on by

29.11.2012  RIFF JTAG – Samsung GT-N8010 Galaxy Note 10.1 WiFi Unbrick – Dead Boot repair supported

Repairing bricked Samsung N8010 is easy with the RIFF Box. The device is based on the Exynos 4412 Processor.
JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung N8010:

  •  Solder JTAG cable to Samsung N8010 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung N8010 is selected in the list of models;
  •  Make sure a fixed TCK frequency is selected;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.

RIFF JTAG – HTC HD Mini T5555 (HTC Photon) Unbrick, Unlock, IMEI, CID repair supported

Posted on by

29.11.2012 RIFF JTAG – HTC HD Mini T5555 (HTC Photon) Unbrick, Unlock, IMEI, CID repair supported

Repairing bricked HTC HD Mini is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PB9210000’.
Currently supported resurrection for NAND memories with 2KB page size.

To resurrect HTC HD Mini:

  •  Solder JTAG cable to HTC HD Mini JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure HTC HD Mini is selected in the list of models;
  •  If you use battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

RIFF JTAG – Huawei U8800 Pro Unbrick – Dead boot repair supported

Posted on by

27.11.2012 RIFF JTAG – Huawei U8800 Pro Unbrick – Dead boot repair supported

Repairing bricked Huawei U8800 PRO is easy with the RIFF Box.

To resurrect Huawei U8800 PRO:

  •  Solder JTAG cable to Huawei U8800 PRO JTAG pads;
  •  Connect Huawei U8800 PRO tablet’s charger for power;
  •  Make sure Huawei U8800 PRO is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – Samsung SCH-i559 Galaxy Mini / Galaxy Pop Unbrick – Dead boot repair supported

Posted on by

27.11.2012   RIFF JTAG – Samsung SCH-i559 Galaxy Mini / Galaxy Pop Unbrick – Dead boot repair supported

Repairing bricked Samsung I559 is easy with the RIFF Box. To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.

To resurrect Samsung I559:

  •  Solder JTAG cable to Samsung I559 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I559 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
.

RIFF JTAG – Samsung SPH-L710 Galaxy S III LTE Unbrick – Dead Boot repair supported

Posted on by

27.11.2012   RIFF JTAG – Samsung SPH-L710 Galaxy S III LTE Unbrick – Dead Boot repair supported

Repairing bricked Samsung SPH-L710 is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung SPH-L710:

  •  Solder JTAG cable to Samsung SPH-L710 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung SPH-L710 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.