Tag Archives: JTAG

RIFF JTAG – Easy repair Nokia Lumia 920 supported

Posted on by

19.10.2013   RIFF JTAG – Easy repair Nokia Lumia 920 supported

Repairing bricked Nokia Lumia 920 is easy with the RIFF Box.
There are RM820 and RM821 revisions available. Please make sure which revision you are resurrecting to be sure to select proper resurrection data.

To resurrect Nokia Lumia 920:

  •  Solder JTAG cable to Nokia Lumia 920 JTAG pads;
  •  Insert batter and connect USB Data cable;
  •  Make sure Nokia Lumia 920 is selected in the list of models;
  •  If you use only battery, press Power On key;
  •  Click Resurrect button;
  •  Depending on revision, select RM820 or RM821;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
.
nokia_lumia_920_2

RIFF JTAG – Easy repair Nokia Lumia 820 Supported

Posted on by

19.10.2013   RIFF JTAG – Easy repair Nokia Lumia 820 Supported

Repairing bricked Nokia Lumia 820 is easy with the RIFF Box.

To resurrect Nokia Lumia 820:

  •  Solder JTAG cable to Nokia Lumia 820 JTAG pads;
  •  Insert batter and connect USB Data cable;
  •  Make sure Nokia Lumia 820 is selected in the list of models;
  •  If you use only battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
.
nokia_lumia_820_2

RIFF JTAG – Easy repair Nokia Lumia 620 supported

Posted on by

19.10.2013   RIFF JTAG – Easy repair Nokia Lumia 620 supported

Repairing bricked Nokia Lumia 620 is easy with the RIFF Box.

To resurrect Nokia Lumia 620:

  •  Solder JTAG cable to Nokia Lumia 620 JTAG pads;
  •  Insert batter and connect USB Data cable;
  •  Make sure Nokia Lumia 620 is selected in the list of models;
  •  If you use only battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
.
nokia_lumia_620_2

RIFF JTAG – Easy repair Nokia Lumia 520 supported

Posted on by

19.10.2013   RIFF JTAG – Easy repair Nokia Lumia 520 supported

Repairing bricked Nokia Lumia 520 is easy with the RIFF Box.

To resurrect Nokia Lumia 520:

  •  Solder JTAG cable to Nokia Lumia 520 JTAG pads;
  •  Insert batter and connect USB Data cable;
  •  Make sure Nokia Lumia 520 is selected in the list of models;
  •  If you use only battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
.
nokia_lumia_520

RIFF JTAG – Easy boot repair Samsung GT-i9195 Galaxy S4 Mini LTE (Samsung Serrano) supported

Posted on by

12.10.2013   RIFF JTAG – Easy boot repair Samsung GT-i9195 Galaxy S4 Mini LTE (Samsung Serrano) supported

Repairing bricked Samsung I9195 is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect Samsung I9195:

  •  Solder JTAG cable to Samsung I9195 JTAG pads;
  •  Connect USB cable or insert battery;
  •  Make sure Samsung I9195 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
samsung_galaxy_s_4_mini_4

RIFF JTAG – Easy boot repair Samsung SGH-T999L Galaxy S III LTE supported

Posted on by

12.10.2013  RIFF JTAG – Easy boot repair Samsung SGH-T999L Galaxy S III LTE supported

Repairing bricked Samsung T999L is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung T999L:

  •  Solder JTAG cable to Samsung T999L JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung T999L is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
samsung_gt-i9300_galaxy_s_iii_2

RIFF JTAG – Easy boot repair LG F220K (Optimus GK) supported

Posted on by

12.10.2013  RIFF JTAG – Easy boot repair LG F220K (Optimus GK) supported

Repairing bricked LG F220K with the RIFF Box requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect LG F220K:

  •  Solder JTAG cable to LG F220K JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG F220K is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
5LG-F220K-Optimus-GK-Android-4.2-5.0-inch-smart-phones

RIFF JTAG – Easy repair LG F200K Optimus Vu II supported

Posted on by

12.10.2013  RIFF JTAG – Easy repair LG F200K Optimus Vu II supported

Repairing bricked LG F200K is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG F200K:

  •  Solder JTAG cable to LG F200K JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG F200K is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
lg_optimus_vu_ii_2

RIFF JTAG – Easy repair HTC One 802d supported

Posted on by

05.10.2013   RIFF JTAG – Easy repair HTC One 802d supported

Repairing bricked HTC One802 Dual (PN0771000) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 2.24.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID may be re-flashed too. In this case after resurrection the phone will have Model ID = ‘PN0771000’.

To resurrect HTC One802 Dual (PN0771000):

  •  Solder JTAG cable to HTC One802 Dual (PN0771000) JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure HTC One802 Dual (PN0771000) is selected in the list of models;
  •  If you use battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.
htc_802d