Tag Archives: Jig

RIFF Box in Space ! Russian astronauts use it on ISS !

Posted on by

01.04.2013   RIFF Box in Space ! Russian astronaut use it on ISS !

We’re proud to announce that RIFF Box is tested in zero gravity environment !
As reported by NASA, Russian onboard computer on ISS lost it’s boot as a result of spoiled Vodka.

They contacted us and we quickly responded (Our coder was working in Baikonur Cosmodrome science center).
Package with RIFF Box and hi quality ribbon cables and JIG-s was launched two days ago from cosmodrome and arrived safelly.

Onboard computer is repaired ok, but there still remains problem with 3D camera.

Check photos bellow:

scene composition: litho, frame 22

.
master

RIFF JTAG – CDMA Huawei C2830 Boot repair supported

Posted on by

06.04.2011    CDMA Huawei C2830 Boot repair supported

Resurrecting Huawei C2830 is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board. Since the JTAG test points are placed under keyboard sticker we recommend using USB data cable to supply power to the device.
Resurrector re-flashes only firmware zone of the phone (0x000000 to 0x5FFFFF).
Please note: if you do not have JIG (that is you solder wires instead) then black graphite covering has to be carefully scratched off in order to access copper surface of the pads.

To resurrect Huawei C2830:

  • Solder JTAG cable to Huawei C2830 JTAG pads;
  • Insert USB Data cable into board and PC;
  • Make sure Huawei C2830 is selected in the list of models;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • De-solder JTAG wires;

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.