Tag Archives: Image File

RIFF JTAG – RIFF Data Exchange Plugin 1.00 released

Posted on by

31.03.2011 RIFF Data Exchange Plugin 1.00 released
First release of the RIFF Data Exchange Plugin: please download it, and then select it on Usefull Plugins page in the JTAG Manager to read short description about the plugin’s abilities. In short it allows RIFF BOX users to share and use Full Image files in centralized manner without need to waste a lot of time for browsing countless forums.

Because of big sizes of Full Image files, we don’t host them, instead users share links to file sharing servers where the files are actually uploaded. (like megaupload.com, rapidshare.com and others) You can browse existent links for required image file or share your image file (by sharing a http link) to help other RIFF BOX users.

If you share image file please take attention to carefully fill file details so for other people this to be an easy task to search for required file (link)
If you used link to download file and found it good or bad or link to be broken – please Rate this link so other users see the usability of the link.
At the moment of first release of this plugin there are already few links shared so you’ll catch the idea fast.

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF JTAG – RIFF JTAG Manager v1.24, RIFF Box Firmware v1.18 released

Posted on by

10.02.2011 RIFF JTAG Manager v1.24, RIFF Box Firmware v1.18

Firmware 1.18
—————————
– PXA270 debug is now available in ARM/Thumb modes (use the GDBServer for this);

JTAG Manager 1.24
—————————
– In case when Resurrector has no DCC Loader the JTAG Manager will now report it correctly and will not allow DCC Read/Write features
– (SDK): more functions are now available (exported) for future Resurrector DLLs;
– Usefull Plugins Enabled
—————————

Qualcom FullFlash Image Processing Tool:

This plugin works with NAND image files which have generic Qualcomm layout

With help of this plugin you can do:
– Disassemble a full NAND image file previously obtained with JTAG Manager (DCC Read/Write Page);
– Inspect each partition contents (main zone and spare zone) simultaneously;
– Save separate partitions to HDD (only main zone, only spare zone, or both zones);
– Write a chosen partition directly into phone;
– Read a chosen partition directly from the phone and substitute old partition contents to new ones;

Please note, direct read/write operations from/to the phone will require proper resurrector to be set (Resurrector Settings: thus before clicking the Activate Plugin button make sure compatible model is selected as well as other settings like TCK/RTCK frequencies).

You can access it from “Usefull Plugins” TAB :