Tag Archives: Firmware

RIFF JTAG – JTAG Manager v1.20, RIFF Box firmware v1.16 released

Posted on by

16.12.2010  JTAG Manager v1.20, RIFF Box firmware v1.16 released

Whats new :

JTAG Manager 1.20

– added 4.2V power supply output (RIFF RJ45 pin 1) controlling feature
For this go to DCC Read/Write page, click “Notifications…”, the Notifications dialog will be displayed,
go to “For Advanced Users” page and set desired mode for “Enable 4.2V output” checkbox.
When enabled, 4.2V line will be powered on after any “JTAG” operation executed and will remain “ON” until
box restart or until “Enable 4.2V output” checkbox is unchecked and any “JTAG” operation is executed.
– (SDK): exported new SUB_ID_GET_ROM_INFO function for resurrectors;

Firmware 1.16

– code is optimized to avoid deadlocks in ARM11 handling routines;
– reset sequence (after NRST assertion) is optimized for ARM11 core;
– added 4.2V power supply output (RIFF RJ45 pin 1) controlling feature

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new files, download it and restart the software.

RIFF JTAG – CDMA Update – 3 New models supported

Posted on by

24.11.2010  CDMA Update – 3 New models supported

  • LG RD3540
  • LG RD3610
  • LG RD6100

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
There is 3 new DLL-s for LG CDMA models, containing pinout, boot files and firmware parts for listed models.

RIFF JTAG – CDMA Update – 4 new LG CDMA Models supported

Posted on by

23.11.2010  CDMA  Update –  4 new LG CDMA Models supported

  • LG RD3000
  • LG RD3100
  • LG RD3500
  • LG RD3510

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
There is 4 new DLL-s for LG CDMA models, containing pinout, boot files and firmware parts for listed models.

RIFF Box JTAG Manager Version 1.17- JTAG Pins Detection added, WORLD FIRST

Posted on by

14.10.2010 RIFF JTAG Manager v1.17 released

Whats new :

  • Addedd chip size information handling for NOR memories
  • Improved erase operation in case DCC Loader operates with a NOR memory.
  • Implemented ResBreak option (SYSTEM.OPTION RESBREAK ON|OFF) in the Trace32 CMM execution engine
  • Added PROBE feature – Detection of JTAG Pins ! ! !

Probing function work via Pin 6 on RJ45 Port :

Advanced users should read the probing manual from here.

Probe dialog example :

_____________________________

RIFF Box firmware v1.15 :

– Probe (JTAG Pins detection) feature added

RIFF JTAG – Huawei Broadband modem E169 Unbrick/Repair supported

Posted on by

07.10.2010  Huawei Broadband modem E169 Unbrick/Repair supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.

“Huawei_E169.dll” contains pinout, repair instructions and required files for single click Huawei E169 broadband modem unbrick/repair dead boot and firmware damages.

RIFF JTAG – Huawei Broadband Modem E585 unbrick supported

Posted on by

06.10.2010 Huawei Broadband Modem E585 unbrick supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_E585.dll” contains pinout, repair instructions and required files for single click Huawei E585 broadband modem unbrick/repair dead boot and firmware damages.

RIFF JTAG – Huawei broadband modem E170/E172 unbrick supported

Posted on by

06.10.2010   Huawei broadband modem E170/E172 unbrick supported

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_E17x.dll” contains pinout, repair instructions and required files for single click Huawei E170/E172 broadband modem unbrick/repair dead boot and firmware damages.

RIFF JTAG – Huawei E220 Broadband modem unbrick/repair dead boot

Posted on by

24.09.2010 Huawei E220 Broadband modem  unbrick/repair dead boot

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_E220.dll” contains pinout, repair instructions and required files for single click Huawei E220 broadband modem unbrick/repair dead boot and firmware damages.

RIFF JTAG – Huawei E1550 Broadband modem unbrick/repair update

Posted on by

27.08.2010 HUawei E1550 broadband modem unbrick/repair updated

– Now resurrector contains both 64MB and 128MB repair firmware data And deletrmines 64 or 128MB modem version automatically – thus it flashes valid firmware.

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_E1550.dll” contains pinout, repair instructions and required repair files for Huawei E1550 broadband modem unbrick/repair.

RIFF JTAG – JTAG Manager v1.12

Posted on by

JTAG Manager 1.12
——————
– Added mutlichain options support for CMM scripts
– Added advanced multichain setup (“Advanced…” in the TAP# field)
– Added Cortex-A8 processor selection
– Added BOX pinout button (which is placed on Resurrection page)

Firmware 1.12
——————
– Addedd Cortex-A8 core 16-bit and 8-bit bus read/writes (which are be used in scripts mostly)
– Addedd CoreSight DAP ROM Table processing for automatic ARM core search.
– Addedd advanced MultiChain selection (IRPRE, IRPOST, DRPRE, DRPOST) in case simple TAP number is impossible to select (like in OMAP850)
– Addedd feature to set custom timeout after NRST is asserted back to high level
(for backward compatibility default timeout for ARM9 is set to 10ms, for other cores – 0ms)

Please start the JTAG Manager and click “Check for updates” button. You’ll be notified about new updates. Download everything and restart the software.
Box firmware will be updated automatically, but in case box stucks in bootcore mode, update firmware manually. Make sure to select v1.12 firmware.

Enjoy making $$$$ with RIFF Box !