21.11.2011 CDMA Updates released
Whats new:
19.11.2011 – QUALCOMM MDM6600 NAND Generic DLL released
Whats new:
Use this for phones which have MDM6600 in baseband – eg LG P999, iPhone 4s, and many other phones which use TEGRA2 AP CPU.
All other QUALCOMM Generic DLL-s are now under same branch, so here is full revised list :
22.06.2011 CDMA day again, 3 new models supported
Whats new:
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
10.06.2011 More CDMA Models, new bug fix updates today
Whats new :
CDMA Models JTAG support :
Bug fix updates :
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
29.05.2011 More CDMA Models, Samsung S5250 Unbrick supported
New CDMA models added today :
Samsung phones :
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
Dopod Magic A6188 (HTC Sapp400) Unbrick, Unlock, IMEI and CID repair supported
The HTC Magic (SAPP400) is based on ESM7206A chipset. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.53.02000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘SAPP*****’. Additionally, you can check ‘Repair RECOVERY zones’ to reflash android BOOT and RECOVERY code.
To resurrect HTC Magic (SAPP400):
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
09.05.2011 RIFF JTAG – CDMA Day Again 🙂 More power for Indian users !
Whats new:
Added Huawei CDMA models support :
Added ZTE CDMA Model :
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
12.04.2011 HTC Polaris (HTC Cruise) Unbrick, Unlock, IMEI and CID Update, ModelID repair supported
Resurrecting HTC Polaris is easy.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 2.20.AxeBox. Additionally, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘POLA10000’.
To resurrect HTC Polaris:
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
21.03.2011 RIFF Box firmware v1.21 released
Whats new:
RIFF BOX firmware is able now to wait (if resurrector DLL will request so) for PXA3XX target to be ready to accept
next packet over DCC: this feature slows down a little the JTAG-to-Target DCC
transfers but guaranties no packets loss for slow clocked targets;
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.