Tag Archives: Dll

RIFF Box JTAG Manager v1.23, RIFF Box Firmware v1.17 released

Posted on by

07.02.2011 RIFF Box JTAG Manager v1.23, RIFF Box firmware v1.17

Firmware 1.17
—————————

* Optimized DCC transfers (debugger-to-target) for ARM9 cores (~64,3% speed increase)
* Added RX-polling feature (debugger-to-target) for ARM9 DCC transfers.

RIFF BOX firmware is able now to wait (if resurrector DLL will request so) for ARM9 target to be ready to accept next packet over DCC: this feature slows down a little the JTAG-to-ARM9 DCC transfers but guaranties no packets loss for slow clocked targets;

JTAG Manager 1.23
—————————

* Improved DCC flashing functionality (for DCC Loaders that work in targets with a small RAM capacity);
* Added 4 very low RTCK Sampling frequencies (20kHz, 40kHz, 60kHz and 80kHz) for some extreme cases
* Fixed another bug in the optimized DLL loading scheme;
* Increased ERASE waiting timeout (for slow NOR flash chips) so now erase operation for such chips will go successully and will not result in erase timeout
* Added “Usefull plugins” page;

“Usefull Plugins” will be new feature, we hope to release first one during this week. So stay tuned.

As usually, click the “Check for Updates” button to obtain latest files.

RIFF JTAG – JTAG Manager v1.13, JTAG Firmware v1.13 released

Posted on by

27.08.2010 JTAG Manager v1.13, JTAG Firmware v1.13 released

Whats new:

JTAG Manger 1.13
———————
– Added feature to display FLASH chip capacity information
– Added feature ‘Auto FullFlash size’ to DCC Read/Write page for simplified Full Images reading/writting
– Fixed DCC Loader Settings dialog
– Added resurrector interface function ‘GetChipSize’ which now enables resurrector DLL to receive target’s memory size
for proper data selection for flashing (like in Huawei Modem E1550 64/128MB versions);

Firmware 1.13
———————
– fixed ARM9 core debug capabilities when core is in Thumb mode
(when ARM9 core was entering debug from Thumb state some CPSR register’s flags were lost, same was when core was leaving debug into Thumb mode);
– FFFFFFEE instruction was added into HAS scripts processing module;

Click “Check for Updates” button to download new JTAG Manager and JTAG firmware.

RIFF JTAG – ZTE MF112 Modem unbrick/repair dead boot

Posted on by

24.08.2010 ZTE MF112 modem unbrick/repair supported.

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“ZTE_MF112.dll” contains pinout, repair instructions and required repair files for ZTE MF112 Modem unbrick, dead boot repair.

RIFF JTAG – Samsung i780 Phone part unbrick/repair

Posted on by

24.08.2010 Samsung i780 Phone part unbrick/repair supported.

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Samsung_i780_Modem.dll” contains pinout, repair instructions and required repair files for Samsung i780 phone part unbrick, dead boot repair.

RIFF JTAG ZTE MF100 Modem Unbrick/Repair

Posted on by

20.08.2010 ZTE MF100 modem unbrick/repair supported.

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“ZTE_MF100.dll” contains pinout, repair instructions and required repair files for ZTE MF100 Modem unbrick, dead boot repair.

RIFF JTAG – Samsung i900 Omnia Unbrick Instructions updated

Posted on by

17.08.2010 RIFF JTAG – Samsung i900 Omnia unbrick, dead boot repair instructions updated

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Samsung_i900_modem.dll” contains pinout, repair instructions and required repair files for Samsung i900 Modem part unbrick, dead boot repair.
“Samsung_i900_PDA.dll” contains pinout, repair instructions and required repair files for Samsung i900 PDA part unbrick, dead boot repair.

RIFF JTAG – HTC Dream, Google G1 Update – added 8 bit bus support

Posted on by

16.08.2010 RIFF JTAG HTC Dream, Google G1 Update – added 8 bit bus support

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“HTC_Dream.dll” contains pinout, repair instructions and required repair files for HTC Dream Google G1 Unbrick, Unlock and IMEI repair.

RIFF JTAG – Unbrick Samsung i7500 Galaxy, repair dead boot

Posted on by

16.08.2010 RIFF JTAG – Samsung  i7500 unbrick, dead boot repair


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Samsung_i7500.dll” contains pinout, repair instructions and required repair files for Samsung  Galaxy i7500 unbrick, dead boot repair.

RIFF JTAG – Samsung i8510 unbrick, dead boot repair

Posted on by

06.08.2010 RIFF JTAG – Samsung i8510 unbrick, dead boot repair


Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Samsung_i8510_modem.dll” contains pinout, repair instructions and required repair files for Samsung i8510 unbrick, dead boot repair.

RIFF JTAG – Toshiba G810 Unbrick, dead boot repair

Posted on by

06.08.2010 RIFF JTAG – Toshiba G810 Unbrick, dead boot repair

Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL-s, download it and restart the software.
“Toshiba_G810.dll” contains pinout, repair instructions and required repair files for Toshiba G810 Unbrick, dead boot repair.