Tag Archives: Boot Repair

RIFF JTAG – Samsung SGH-T879 Galaxy Note Unbrick – Dead Boot repair supported

Posted on by

29.12.2012  RIFF JTAG – Samsung SGH-T879 Galaxy Note Unbrick – Dead Boot repair supported

Repairing bricked Samsung T879 is easy with the RIFF Box. The device is based on the Qualcomm APQ8060 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung T879:

  •  Solder JTAG cable to Samsung T879 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung T879 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
t-mobile-galaxy-note

RIFF JTAG – Samsung GT-S7562i Galaxy S Duos Unbrick – Dead Boot repair supported

Posted on by

29.12.2012  RIFF JTAG – Samsung GT-S7562i Galaxy S Duos Unbrick – Dead Boot repair supported

Repairing bricked Samsung S7562I is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect Samsung S7562I:

  •  Solder JTAG cable to Samsung S7562I JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Samsung S7562I is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

.
samsung_galaxy_s_duos

RIFF JTAG – Samsung GT-S7530 Omnia M Unbrick – Dead Boot repair supported

Posted on by

29.12.2012  RIFF JTAG – Samsung GT-S7530 Omnia M Unbrick – Dead Boot repair supported

Repairing bricked Samsung S7530 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect Samsung S7530:

  •  Solder JTAG cable to Samsung S7530 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Samsung S7530 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Up’ and ‘Camera’ keys and press Power-On.

.
samsung_omnia_m

RIFF JTAG – Samsung GT-S6012 Galaxy Music Duos Unbrick – Dead Boot repair supported

Posted on by

29.12.2012  RIFF JTAG – Samsung GT-S6012 Galaxy Music Duos Unbrick – Dead Boot repair supported

Repairing bricked Samsung S6012 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect Samsung S6012:

  •  Solder JTAG cable to Samsung S6012 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Samsung S6012 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ and ‘OK’ keys and press Power-On. And after you see the warning message press ‘Volume Up’ key to enter Download Mode.

.
samsung_galaxy_music

RIFF JTAG – Samsung SCH-i535 Galaxy S3 Unbrick – Dead Boot repair supported

Posted on by

29.12.2012   RIFF JTAG – Samsung SCH-i535 Galaxy S3 Unbrick – Dead Boot repair supported

Repairing bricked Samsung I535 is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung I535:

  •  Solder JTAG cable to Samsung I535 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I535 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
samsung_galaxy_s_iii_lte

RIFF JTAG – Samsung SHW-M200s Nexus S Unbrick – Dead Boot repair supported

Posted on by

29.12.2012  RIFF JTAG – Samsung SHW-M200s Nexus S Unbrick – Dead Boot repair supported

Repairing bricked Samsung M200S is easy with the RIFF Box. The phone is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in very rare cases it is possible that you will have to hold Power On key during initial connection.

To resurrect Samsung M200S:

  •  Solder JTAG cable to Samsung M200S JTAG pads;
  •  Connect microUSB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung M200S is selected in the list of models;
  •  Make sure a fixed TCK frequency is selected;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.
samsung_nexus_s

RIFF JTAG – Samsung SHW-M180W Galaxy Tab WiFi Unbrick – Dead Boot repair supported

Posted on by

29.12.2012  RIFF JTAG – Samsung SHW-M180W Galaxy Tab WiFi Unbrick – Dead Boot repair supported

Samsung M180W is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in some cases it is possible that you will have to hold Power On key during initial connection.

To resurrect Samsung M180W:

  •  Solder JTAG cable to Samsung M180W JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Attach battery connector;
  •  Make sure Samsung M180W is selected in the list of models;
  •  Make sure a fixed TCK frequency is selected;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.
brand-samsung-galaxy-tab-p1010-wifi-android-fantasytech-1206-08-FantasyTECH@2

RIFF JTAG – AT&T HTC Status (HTC ChaCha PH0613000) Ubrick, Boot, IMEI, SuperCID repair supported

Posted on by

29.12.2012  RIFF JTAG – AT&T HTC Status (HTC ChaCha PH0613000) Ubrick, Boot, IMEI, SuperCID repair supported

Repairing bricked HTC ChaCha (HTC Status) (PH0613000) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.13.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PH0613000’.

To resurrect HTC ChaCha:

  •  Solder JTAG cable to HTC ChaCha (PH0613000) JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure HTC ChaCha (PH0613000) is selected in the list of models;
  •  If you use battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.
htc_status

RIFF JTAG – Haier C2010 Ubrick – Dead Boot repair supported

Posted on by

29.12.2012   RIFF JTAG – Haier C2010 Ubrick – Dead Boot repair supported

Resurrecting Haier C2010 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x0020/0x8832

To resurrect Haier C2010:

  •  Solder JTAG cable to Haier C2010 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Haier C2010 is selected in the list of models;
  •  Click Resurrect button;
  •  Choose which areas to flash;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

.
haier-c2010-mobile-phone-medium-1

RIFF JTAG – ZTE F160 Unbrick – Dead Boot repair supported

Posted on by

29.12.2012  RIFF JTAG – ZTE F160 Unbrick – Dead Boot repair supported

Repairing bricked ZTE F160 is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected.

To resurrect ZTE F160:

  •  Solder JTAG cable to ZTE F160 JTAG pads;
  •  Make sure ZTE F160 is selected in the list of models;
  •  Connect USB Data Cable;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

zte_f160