Tag Archives: Boot Repair

RIFF JTAG – Samsung GT-i8350 Omnia W Unbrick – Dead Boot Repair Supported

Posted on by

14.11.2012   RIFF JTAG – Samsung GT-i8350 Omnia W Unbrick – Dead Boot Repair Supported

Repairing bricked Samsung I8350 is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.

To resurrect Samsung I8350:

  •  Solder JTAG cable to Samsung I8350 JTAG pads;
  •  Make sure Samsung I8350 is selected in the list of models;
  •  Insert battery and connect USB Data cable;
  •  If you use only battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Camera’ keys and press ‘Power ON’ button.

.

RIFF JTAG – Samsung GT-P7320 Galaxy Tab 8.9 LTE Unbrick – Dead Boot Repair Supported

Posted on by

13.11.2012  RIFF JTAG – Samsung GT-P7320 Galaxy Tab 8.9 LTE Unbrick – Dead Boot Repair Supported

Repairing bricked Samsung P7320 is easy with the RIFF Box. The device is based on the Qualcomm APQ8060 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung P7320:

  •  Solder JTAG cable to Samsung P7320 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung P7320 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Up’ key (which is closest to Power-On key) and press Power-On.

.

RIFF JTAG – Huawei U8800 Impulse 4G/ X5 Unbrick – Boot Repair Supported

Posted on by

13.11.2012   RIFF JTAG – Huawei U8800 Impulse 4G/ X5 Unbrick – Boot Repair Supported

Repairing bricked Huawei U8800 is easy with the RIFF Box.

To resurrect Huawei U8800:

  •  Solder JTAG cable to Huawei U8800 JTAG pads;
  •  Connect Huawei U8800 tablet’s charger for power;
  •  Make sure Huawei U8800 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – HTC Wildfire S CDMA (HTC Marvel C) Unbrick – Dead Boot Repair and full Support

Posted on by

13.11.2012 RIFF JTAG – HTC Wildfire S CDMA (HTC Marvel C) Unbrick – Dead Boot Repair and full Support

Resurrecting HTC WildFireS CDMA is easy with RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.09.0000 (for NAND chips with 4Kb page size). Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PG7620000’. Additionally, you can check ‘Repair RECOVERY zones’ to reflash android BOOT and RECOVERY code.

To resurrect HTC WildFireS CDMA:

  •  Solder JTAG cable to HTC WildFireS CDMA JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure HTC WildFireS CDMA is selected in the list of models;
  •  If you use battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button. In few seconds you should see usual android boot mode screen.

.

RIFF JTAG – LG F-160S Optimus LTE2 Unbrick – Dead Boot Repair Supported

Posted on by

09.11.2012 RIFF JTAG – LG F-160S Optimus LTE2 Unbrick – Dead Boot Repair Supported

Repairing bricked LG F160S is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG F160S:

  •  Solder JTAG cable to LG F160S JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG F160S is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
.

RIFF JTAG – LG F-160L Optimus LTE2 Unbrick – Dead Boot Repair Supported

Posted on by

09.11.2012  RIFF JTAG – LG F-160L Optimus LTE2 Unbrick – Dead Boot Repair Supported

Repairing bricked LG F160L is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG F160L:

  •  Solder JTAG cable to LG F160L JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG F160L is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
.

RIFF JTAG – LG F-160K Optimus LTE2 Unbrick – Dead Boot Repair Supported

Posted on by

09.11.2012   RIFF JTAG – LG F-160K Optimus LTE2 Unbrick – Dead Boot Repair Supported

Repairing bricked LG F160K is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG F160K:

  •  Solder JTAG cable to LG F160K JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG F160K is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
.

RIFF JTAG – Pantech Sky Vega LTE EX IM-A820L Ubrick – Dead Boot Repair Supported

Posted on by

08.11.2012  RIFF JTAG – Pantech Sky Vega LTE EX IM-A820L Ubrick – Dead Boot Repair Supported

Repairing bricked Pantech Sky IM-A820L is easy with the RIFF Box.
To resurrect Pantech Sky IM-A820L:

  • Solder JTAG cable to Pantech Sky IM-A820L  JTAG pads;
  • Insert Pantech Sky IM-A820L into any USB port for power;
  • Make surePantech Sky IM-A820L is selected in the list of models;
  • Click Resurrect button;
  • Select areas to be repaired in the settings window;
  • Wait till software signals a successful operation completion;
  • De-solder JTAG wires;

Now phone can enter fastboot mode and flashed with original flasher.
,

RIFF JTAG – Pantech Sky Vega LTE IM-A800s Unbrick – Dead Boot Repair Supported

Posted on by

08.11.2012  RIFF JTAG – Pantech Sky Vega LTE IM-A800s Unbrick – Dead Boot Repair Supported

Repairing bricked Pantech A800S is easy with the RIFF Box.

To resurrect Pantech A800S:

  •  Solder JTAG cable to Pantech A800S JTAG pads;
  •  Insert Pantech A800S into any USB port for power;
  •  Make sure Pantech A800S is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now phone can enter fastboot mode and flashed with original flasher.
.

RIFF JTAG – Pantech SKY Vega RACER IM-A760S Unbrick – Dead Boot Repair Supported

Posted on by

08.11.2012  RIFF JTAG – Pantech SKY Vega RACER IM-A760S Unbrick – Dead Boot Repair Supported

Repairing bricked Pantech A760S is easy with the RIFF Box.

To resurrect Pantech A760S:

  •  Solder JTAG cable to Pantech A760S JTAG pads;
  •  Insert Pantech A760S into any USB port for power;
  •  Make sure Pantech A760S is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now phone can enter fastboot mode and flashed with original flasher.
.