Tag Archives: Boot Repair

RIFF JTAG – Huawei Ascend G330 (Huawei U8825D) Unbrick – Dead Boot Repair Supported

Posted on by

19.11.2012   RIFF JTAG – Huawei Ascend G330 (Huawei U8825D) Unbrick – Dead Boot Repair Supported

Repairing bricked Huawei U8825D is easy with the RIFF Box.

To resurrect Huawei U8825D:

  •  Solder JTAG cable to Huawei U8825D JTAG pads;
  •  Connect Huawei U8825D tablet’s charger for power;
  •  Make sure Huawei U8825D is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – Huawei Ascend G300 (Huawei U8815) Unbrick – Dead Boot Repair Supported

Posted on by

19.11.2012  RIFF JTAG – Huawei Ascend G300 (Huawei U8815) Unbrick – Dead Boot Repair Supported

Repairing bricked Huawei U8815 is easy with the RIFF Box.

To resurrect Huawei U8815:

  •  Solder JTAG cable to Huawei U8815 JTAG pads;
  •  Connect Huawei U8815 tablet’s charger for power;
  •  Make sure Huawei U8815 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – HTC EVO 4G LTE (HTC Jewel) Unbrick – Dead Boot Repair Supported

Posted on by

16.11.2012    RIFF JTAG – HTC EVO 4G LTE  Unbrick – Dead Boot Repair Supported

Repairing bricked HTC Jewel is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.15.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PJ7510000’.

To resurrect HTC Jewel:

  •  Solder JTAG cable to HTC Jewel JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure HTC Jewel is selected in the list of models;
  •  If you use battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

RIFF JTAG – Cincinnati Bell Huawei U8500 Unbrick – Dead Boot Repair Supported

Posted on by

16.11.2012   RIFF JTAG – Cincinnati Bell Huawei U8500 Unbrick – Dead Boot Repair Supported

Repairing bricked Huawei U8500 is easy with the RIFF Box.

To resurrect Huawei U8500:

  •  Solder JTAG cable to Huawei U8500 JTAG pads;
  •  Connect Huawei U8500 tablet’s charger for power;
  •  Make sure Huawei U8500 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

.

RIFF JTAG – Huawei U2800 Unbrick – Dead Boot Repair Supported

Posted on by

16.11.2012   RIFF JTAG – Huawei U2800 Unbrick – Dead Boot Repair Supported

Repairing bricked Huawei U2800 is easy with the RIFF Box.

To resurrect Huawei U2800:

  •  Solder JTAG cable to Huawei U2800 JTAG pads;
  •  Connect Huawei U2800 tablet’s charger for power;
  •  Make sure Huawei U2800 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

,

RIFF JTAG – Huawei Ideos U8150/U8150D Unbrick – Boot Repair Supported

Posted on by

16.11.2012  RIFF JTAG – Huawei Ideos U8150/U8150D Unbrick – Boot Repair Supported

Resurrecting Huawei U8150 is simple.
Connection can be established with charger connected while battery is inside.

To resurrect Huawei U8150:

  •  Solder JTAG cable to Huawei U8150 JTAG pads;
  •  Connect Huawei U8150 tablet’s charger for power;
  •  Make sure Huawei U8150 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

RIFF JTAG – Huawei Ascend Y200 (Huawei U8655) Unbrick – Dead Boot Repair Supported

Posted on by

16.11.2012  RIFF JTAG – Huawei Ascend Y200 (Huawei U8655) Unbrick – Dead Boot Repair Supported

Resurrecting Huawei U8655 is simple with RIFF Box.
Connection can be established with charger connected while battery is inside.

To resurrect Huawei U8655:

  •  Solder JTAG cable to Huawei U8655 JTAG pads;
  •  Connect Huawei U8655 tablet’s charger for power;
  •  Make sure Huawei U8655 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

RIFF JTAG – Pantech Vega Racer 2 LTE IM-A830L Unbrick – Dead Boot Repair Supported

Posted on by

16.11.2012  RIFF JTAG – Pantech Vega Racer 2 LTE IM-A830L Unbrick – Dead Boot Repair Supported

Repairing bricked Pantech A830L is easy with the RIFF Box.

To resurrect Pantech A830L:

  •  Solder JTAG cable to Pantech A830L JTAG pads;
  •  Insert Pantech A830L into any USB port for power;
  •  Make sure Pantech A830L is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

.

RIFF JTAG – Samsung GT-i8530 Galaxy Beam Unbrick – Dead Boot Repair Supported

Posted on by

16.11.2012 RIFF JTAG – Samsung GT-i8530 Galaxy Beam Unbrick – Dead Boot Repair SupportedĐ

Repairing bricked Samsung I8530 is easy with the RIFF Box.
Please note, if you have problems connecting phone, then make sure USB Cable is disconnected, insert battery and press Power On and try connecting again.

To resurrect Samsung I8530:

  •  Solder JTAG cable to Samsung I8530 JTAG pads;
  •  Attach battery;
  •  Disconnect USB Cable (if was connected);
  •  Make sure Samsung I8530 is selected in the list of models;
  •  Click Resurrect button;
  •  If required, press Power On key;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

RIFF JTAG – LG E610/E612 Optimus L5 Unbrick -Dead Boot Repair Supported

Posted on by

16.11.2012   RIFF JTAG – LG E610/E612 Optimus L5 Unbrick -Dead Boot Repair Supported

Repairing bricked LG E612 is easy with the RIFF Box. 
Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.

To resurrect LG E612:

  •  Solder JTAG cable to LG E612 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG E612 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods

To enter emergency mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume down’ key and press ‘Power ON’ button.

.