RIFF JTAG – HTC One S Z560E (HTC Ville C) Unbrick – Dead Boot Repair Supported

Posted on by

21.11.2012  RIFF JTAG – HTC One S Z560E (HTC Ville C) Unbrick – Dead Boot Repair Supported

Repairing bricked HTC OneS is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 2.09.0001 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PJ4020000’.

To resurrect HTC OneS:

  •  Solder JTAG cable to HTC OneS JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure HTC OneS is selected in the list of models;
  •  If you use battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

RIFF JTAG – Huawei Boulder U8350/U8350-51 Unbrick – Dead Boot Repair Supported

Posted on by

20.11.2012  RIFF JTAG – Huawei Boulder U8350/U8350-51 Unbrick – Dead Boot Repair Supported

Repairing bricked Huawei U8350 is easy with the RIFF Box.

To resurrect Huawei U8350:

  •  Solder JTAG cable to Huawei U8350 JTAG pads;
  •  Connect Huawei U8350 tablet’s charger for power;
  •  Make sure Huawei U8350 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – Samsung Gravity 3 SGH-T479 Unbrick – Dead Boot Repair Supported

Posted on by

20.11.2012  RIFF JTAG – Samsung Gravity 3 SGH-T479 Unbrick – Dead Boot Repair Supported

The Samsung T479 board is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.

To resurrect Samsung T479:

  •  Solder JTAG cable to Samsung T479 JTAG pads;
  •  Connect USB cable;
  •  Make sure Samsung T479 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Up’ and ‘Camera’ keys and press ‘Power ON’ button.

.

RIFF JTAG – HTC Amaze 4G (HTC Ruby) Unbrick – Dead Boot Repair Supported

Posted on by

20.11.2012  RIFF JTAG – HTC Amaze 4G (HTC Ruby) Unbrick – Dead Boot Repair Supported

Repairing bricked HTC Amaze4G is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Resurrector will reflash radio’s boot zone and will re-write PDA’s HBOOT version 1.90.0008. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PH8511000’.
There is option to reflash BOOT and RECOVERY zones.

To resurrect HTC Amaze4G:

  •  Solder JTAG cable to HTC Amaze4G JTAG pads;
  •  Insert batter and connect USB Data cable;
  •  Make sure HTC Amaze4G is selected in the list of models;
  •  If you use only battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

RIFF JTAG – Huawei Sonic (Huawei U8650) Unbrick – Dead Boot Repair Supported

Posted on by

20.11.2012 RIFF JTAG – Huawei Sonic (Huawei U8650) Unbrick – Dead Boot Repair Supported

Repairing bricked Huawei U8650 is easy with the RIFF Box.

To resurrect Huawei U8650:

  •  Solder JTAG cable to Huawei U8650 JTAG pads;
  •  Connect Huawei U8650 tablet’s charger for power;
  •  Make sure Huawei U8650 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – Huawei Ascend G330 (Huawei U8825D) Unbrick – Dead Boot Repair Supported

Posted on by

19.11.2012   RIFF JTAG – Huawei Ascend G330 (Huawei U8825D) Unbrick – Dead Boot Repair Supported

Repairing bricked Huawei U8825D is easy with the RIFF Box.

To resurrect Huawei U8825D:

  •  Solder JTAG cable to Huawei U8825D JTAG pads;
  •  Connect Huawei U8825D tablet’s charger for power;
  •  Make sure Huawei U8825D is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – Huawei Ascend G300 (Huawei U8815) Unbrick – Dead Boot Repair Supported

Posted on by

19.11.2012  RIFF JTAG – Huawei Ascend G300 (Huawei U8815) Unbrick – Dead Boot Repair Supported

Repairing bricked Huawei U8815 is easy with the RIFF Box.

To resurrect Huawei U8815:

  •  Solder JTAG cable to Huawei U8815 JTAG pads;
  •  Connect Huawei U8815 tablet’s charger for power;
  •  Make sure Huawei U8815 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – HTC EVO 4G LTE (HTC Jewel) Unbrick – Dead Boot Repair Supported

Posted on by

16.11.2012    RIFF JTAG – HTC EVO 4G LTE  Unbrick – Dead Boot Repair Supported

Repairing bricked HTC Jewel is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.15.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PJ7510000’.

To resurrect HTC Jewel:

  •  Solder JTAG cable to HTC Jewel JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure HTC Jewel is selected in the list of models;
  •  If you use battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

RIFF JTAG – Cincinnati Bell Huawei U8500 Unbrick – Dead Boot Repair Supported

Posted on by

16.11.2012   RIFF JTAG – Cincinnati Bell Huawei U8500 Unbrick – Dead Boot Repair Supported

Repairing bricked Huawei U8500 is easy with the RIFF Box.

To resurrect Huawei U8500:

  •  Solder JTAG cable to Huawei U8500 JTAG pads;
  •  Connect Huawei U8500 tablet’s charger for power;
  •  Make sure Huawei U8500 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

.

RIFF JTAG – Huawei U2800 Unbrick – Dead Boot Repair Supported

Posted on by

16.11.2012   RIFF JTAG – Huawei U2800 Unbrick – Dead Boot Repair Supported

Repairing bricked Huawei U2800 is easy with the RIFF Box.

To resurrect Huawei U2800:

  •  Solder JTAG cable to Huawei U2800 JTAG pads;
  •  Connect Huawei U2800 tablet’s charger for power;
  •  Make sure Huawei U2800 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

,