RIFF JTAG – Haier C2010 Ubrick – Dead Boot repair supported

Posted on by

29.12.2012   RIFF JTAG – Haier C2010 Ubrick – Dead Boot repair supported

Resurrecting Haier C2010 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x0020/0x8832

To resurrect Haier C2010:

  •  Solder JTAG cable to Haier C2010 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Haier C2010 is selected in the list of models;
  •  Click Resurrect button;
  •  Choose which areas to flash;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

.
haier-c2010-mobile-phone-medium-1

RIFF JTAG – ZTE F160 Unbrick – Dead Boot repair supported

Posted on by

29.12.2012  RIFF JTAG – ZTE F160 Unbrick – Dead Boot repair supported

Repairing bricked ZTE F160 is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected.

To resurrect ZTE F160:

  •  Solder JTAG cable to ZTE F160 JTAG pads;
  •  Make sure ZTE F160 is selected in the list of models;
  •  Connect USB Data Cable;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

zte_f160

Pantech Vega S – Sky IM-A730S Unbrick – Dead Boot Repair supported

Posted on by

17.12.2012 Pantech Vega S – Sky IM-A730S Unbrick – Dead Boot Repair supported

Repairing bricked Pantech A730S is easy with the RIFF Box.

To resurrect Pantech A730S:

  •  Solder JTAG cable to Pantech A730S JTAG pads;
  •  Insert Pantech A730S into any USB port for power and attach battery if required;
  •  Make sure Pantech A730S is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now You can update software via self update function at Sky web page.
.
SKY-IM-A730S

RIFF JTAG – Pantech Vega Racer 2 LTE SKY IM-A830K Unbrick – Dead Boot repair supported

Posted on by

08.12.2012  RIFF JTAG – Pantech Vega Racer 2 LTE SKY IM-A830K Unbrick – Dead Boot repair supported

Repairing bricked Pantech A830K is easy with the RIFF Box.

To resurrect Pantech A830K:

  •  Solder JTAG cable to Pantech A830K JTAG pads;
  •  Insert Pantech A830K into any USB port for power;
  •  Make sure Pantech A830K is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now You can update software via self update function at Sky web page.
.

RIFF JTAG – Pantech Vega Racer 2 LTE SKY IM-A830S Unbrick – Dead Boot repair supported

Posted on by

08.12.2012  RIFF JTAG – Pantech Vega Racer 2 LTE SKY IM-A830S Unbrick – Dead Boot repair supported

Repairing bricked Pantech A830S is easy with the RIFF Box.

To resurrect Pantech A830S:

  •  Solder JTAG cable to Pantech A830S JTAG pads;
  •  Insert Pantech A830S into any USB port for power;
  •  Make sure Pantech A830S is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now You can update software via self update function at Sky web page.
.

RIFF JTAG – Samsung SHV-E110S Galaxy S II LTE (Samsung Celox) Unbrick – Dead Boot repair supported

Posted on by

08.12.2012  RIFF JTAG – Samsung SHV-E110S Galaxy S II LTE (Samsung Celox)  Unbrick – Dead Boot repair supported

Repairing bricked Samsung E110S is easy with the RIFF Box. The device is based on the 2nd-generation Qualcomm MSM8260 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung E110S:

  •  Solder JTAG cable to Samsung E110S JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung E110S is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.

RIFF JTAG – Samsung GT-i9020A Nexus S Unbrick – Dead Boot repair supported

Posted on by

08.12.2012 RIFF JTAG – Samsung GT-i9020A Nexus S Unbrick – Dead Boot repair supported

Repairing bricked Samsung I9020A is easy with the RIFF Box. The phone is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in very rare cases it is possible that you will have to hold Power On key during initial connection.

To resurrect Samsung I9020A:

  •  Solder JTAG cable to Samsung I9020A JTAG pads;
  •  Connect microUSB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I9020A is selected in the list of models;
  •  Make sure a fixed TCK frequency is selected;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

RIFF JTAG – Samsung GT-i9020T Nexus S Unbrick – Dead Boot repair supported

Posted on by

08.12.2012  RIFF JTAG – Samsung GT-i9020T Nexus S Unbrick – Dead Boot repair supported

Repairing bricked Samsung I9020T is easy with the RIFF Box. The phone is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in very rare cases it is possible that you will have to hold Power On key during initial connection.

To resurrect Samsung I9020T:

  •  Solder JTAG cable to Samsung I9020T JTAG pads;
  •  Connect microUSB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I9020T is selected in the list of models;
  •  Make sure a fixed TCK frequency is selected;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

RIFF JTAG – Pantech SKY VEGA S5 A840S Unbrick – Dead Boot repair supported

Posted on by

RIFF JTAG – Pantech SKY VEGA S5 A840S Unbrick – Dead Boot repair supported

 

Repairing bricked Pantech A840S is easy with the RIFF Box.

To resurrect Pantech A840S:

  •  Solder JTAG cable to Pantech A840S JTAG pads;
  •  Insert Pantech A840S into any USB port for power;
  •  Make sure Pantech A840S is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

.

RIFF JTAG – Samsung SCH-i509 Galaxy Y Unbrick – Dead Boot repair supported

Posted on by

30.11.2012  RIFF JTAG – Samsung SCH-i509 Galaxy Y Unbrick – Dead Boot repair supported

Repairing bricked Samsung I509 is easy with the RIFF Box.To power the phone connect USB cable and insert battery. Sometimes it’s needed to press and HOLD Power On key.

To resurrect Samsung I509:

  •  Solder JTAG cable to Samsung I509 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I509 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

.