RIFF JTAG – Samsung SGH-i337M Galaxy S 4 LTE 32GB (Samsung Altius) Unbrick Total Repair supported

10.08.2013  RIFF JTAG – Samsung SGH-i337M Galaxy S 4 LTE 32GB (Samsung Altius) Unbrick Total Repair supported

Repairing bricked Samsung I337M is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.
During Resurrection process you can select areas to be resurrected. Select them wisely: selecting everything in one bunch may just increase flashing time while it’s possible that all you need is to repair only few certain areas.

To resurrect Samsung I337M:

  •  Solder JTAG cable to Samsung I337M JTAG pads;
  •  Connect USB cable or insert battery;
  •  Make sure Samsung I337M is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
samsung_galaxy_s_4_4

RIFF JTAG – Pantech Vega No6 IM-A860S boot repair supported

10.08.2013  RIFF JTAG – Pantech Vega No6 IM-A860S boot repair supported

Repairing bricked Pantech A860S is easy with the RIFF Box.

To resurrect Pantech A860S:

  •  Solder JTAG cable to Pantech A860S JTAG pads;
  •  Insert Pantech A860S into any USB port for power;
  •  Make sure Pantech A860S is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

.
pantech_vega_no6

RIFF JTAG – Pantech Vega LTE M IM-A810S SKY boot repair supported

10.08.2013  RIFF JTAG – Pantech Vega LTE M IM-A810S SKY boot repair supported

Repairing bricked Pantech A810S is easy with the RIFF Box.

To resurrect Pantech A810S:

  •  Solder JTAG cable to Pantech A810S JTAG pads;
  •  Insert Pantech A810S into any USB port for power;
  •  Make sure Pantech A810S is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

.
pantech_vega_lte_im-a810s_2

RIFF JTAG – Pantech Vega IM-A650S boot repair supported

10.08.2013  RIFF JTAG – Pantech Vega IM-A650S boot repair supported

Repairing bricked Pantech A650S is easy with the RIFF Box.

To resurrect Pantech A650S:

  •  Solder JTAG cable to Pantech A650S JTAG pads;
  •  Insert Pantech A650S into any USB port for power;
  •  Make sure Pantech A650S is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

.
Pantech-SKY-Vega-IM-A650S

RIFF JTAG – LG F260S Optimus LTE III boot repair supported

10.08.2013  RIFF JTAG – LG F260S Optimus LTE III boot repair supported

Repairing bricked LG F260S with the RIFF Box requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect LG F260S:

  •  Solder JTAG cable to LG F260S JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG F260S is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods

To enter emergency mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume down’ and ‘Camera’ keys and press ‘Power ON’ button.

.
lg_optimus_lte_iii

RIFF JTAG – LG E975 Optimus G (LG Gee) boot repair supported

10.08.2013  RIFF JTAG – LG E975 Optimus G (LG Gee) boot repair supported

Repairing bricked LG E975 with the RIFF Box requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect LG E975:

  •  Solder JTAG cable to LG E975 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG E975 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods

To enter emergency mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume down’ and ‘Camera’ keys and press ‘Power ON’ button.

.
lg_optimus_g_4

RIFF JTAG – LG E960 Nexus 4 (LG Mako) boot repair supported

10.08.2013  RIFF JTAG – LG E960 Nexus 4 (LG Mako) boot repair supported

Repairing bricked LG E960 with the RIFF Box requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect LG E960:

  •  Solder JTAG cable to LG E960 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG E960 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods

To enter emergency mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume down’ and ‘Camera’ key

.
lg_e960_nexus_4

RIFF JTAG – LG E970 Optimus G (LG Gee) boot repair supported

10.08.2013 RIFF JTAG – LG E970 Optimus G (LG Gee) boot repair supported

Repairing bricked LG E970 with the RIFF Box requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect LG E970:

  •  Solder JTAG cable to LG E970 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG E970 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods

To enter emergency mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume down’ and ‘Camera’ keys and press ‘Power ON’ button.

.
lg_optimus_970g_2

RIFF JTAG – Huawei Ascend G510 boot repair supported

10.08.2013  RIFF JTAG – Huawei Ascend G510 boot repair supported

Repairing bricked Huawei G510 is easy with the RIFF Box.

To resurrect Huawei G510:

  •  Solder JTAG cable to Huawei G510 JTAG pads;
  •  Connect Huawei G510 tablet’s charger for power;
  •  Make sure Huawei G510 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

Root-Huawei-Ascend-G510-Huawei-Orange-Daytona-Huawei-U89511

RIFF JTAG – JTAG Manager v1.50 released

02.08.2013  RIFF JTAG – JTAG Manager v1.50 released

JTAG Manager 1.50
—————————

  •  Firmware update procedure is simplified now. To update box firmware user now has to click single button, no other actions are required!!! (in previous versions update firmware opration caused many questions from unexperienced users).
  •  Update server moved to new host. Thus, Check Updates for Updates button will now work correctly.
  •  Numlock key recognition is added so now additional keypad can be used to enter digits 0..9 into decimal fields (like address/length fields)

You can also download installer package from here:

JTAG Manager v1.50

You may need to install following Microsoft software:

Visual C++ 2005 Redistributable Package for (X86)

Visual C++ 2005 Redistributable Packager for (x64)