RIFF JTAG – Easy repair Samsung GT-i9190 Galaxy S4 Mini (Samsung Serrano) supported

25.10.2013   RIFF JTAG – Easy repair Samsung GT-i9190 Galaxy S4 Mini (Samsung Serrano) supported

Repairing bricked Samsung I9190 is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect Samsung I9190:

  •  Solder JTAG cable to Samsung I9190 JTAG pads;
  •  Connect USB cable or insert battery;
  •  Make sure Samsung I9190 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
samsung_galaxy_s_4_mini

RIFF JTAG – Easy repair Samsung GT-i9295 Galaxy S4 Active (Samsung Fortius) supported

25.10.2013   RIFF JTAG – Easy repair Samsung GT-i9295 Galaxy S4 Active (Samsung Fortius) supported

Repairing bricked Samsung I9195 is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect Samsung I9195:

  •  Solder JTAG cable to Samsung I9195 JTAG pads;
  •  Connect USB cable or insert battery;
  •  Make sure Samsung I9195 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
samsung_galaxy_s4_active

RIFF JTAG – Easy repair Samsung Galaxy S II LTE SC-03D (Samsung Celox) supported

25.10.2013  RIFF JTAG – Easy repair Samsung Galaxy S II LTE SC-03D (Samsung Celox) supported

Repairing bricked Samsung SC-03D is easy with the RIFF Box. The device is based on the 2nd-generation Qualcomm MSM8260 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung SC-03D:

  •  Solder JTAG cable to Samsung SC-03D JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung SC-03D is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
samsung_sc-03d_galaxy_s_ii_lte

RIFF JTAG – Easy repair ZTE Racer X850 supported

25.10.2013   RIFF JTAG – Easy repair ZTE Racer X850 supported

Repairing bricked ZTE Racer is easy with the RIFF Box.

To resurrect ZTE Racer:

  •  Solder JTAG cable to ZTE Racer JTAG pads;
  •  Connect ZTE Racer tablet’s charger for power;
  •  Make sure ZTE Racer is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
zte-racer

RIFF JTAG – Easy repair Nokia Lumia 920 supported

19.10.2013   RIFF JTAG – Easy repair Nokia Lumia 920 supported

Repairing bricked Nokia Lumia 920 is easy with the RIFF Box.
There are RM820 and RM821 revisions available. Please make sure which revision you are resurrecting to be sure to select proper resurrection data.

To resurrect Nokia Lumia 920:

  •  Solder JTAG cable to Nokia Lumia 920 JTAG pads;
  •  Insert batter and connect USB Data cable;
  •  Make sure Nokia Lumia 920 is selected in the list of models;
  •  If you use only battery, press Power On key;
  •  Click Resurrect button;
  •  Depending on revision, select RM820 or RM821;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
.
nokia_lumia_920_2

RIFF JTAG – Easy repair Nokia Lumia 820 Supported

19.10.2013   RIFF JTAG – Easy repair Nokia Lumia 820 Supported

Repairing bricked Nokia Lumia 820 is easy with the RIFF Box.

To resurrect Nokia Lumia 820:

  •  Solder JTAG cable to Nokia Lumia 820 JTAG pads;
  •  Insert batter and connect USB Data cable;
  •  Make sure Nokia Lumia 820 is selected in the list of models;
  •  If you use only battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
.
nokia_lumia_820_2

RIFF JTAG – Easy repair Nokia Lumia 620 supported

19.10.2013   RIFF JTAG – Easy repair Nokia Lumia 620 supported

Repairing bricked Nokia Lumia 620 is easy with the RIFF Box.

To resurrect Nokia Lumia 620:

  •  Solder JTAG cable to Nokia Lumia 620 JTAG pads;
  •  Insert batter and connect USB Data cable;
  •  Make sure Nokia Lumia 620 is selected in the list of models;
  •  If you use only battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
.
nokia_lumia_620_2

RIFF JTAG – Easy repair Nokia Lumia 520 supported

19.10.2013   RIFF JTAG – Easy repair Nokia Lumia 520 supported

Repairing bricked Nokia Lumia 520 is easy with the RIFF Box.

To resurrect Nokia Lumia 520:

  •  Solder JTAG cable to Nokia Lumia 520 JTAG pads;
  •  Insert batter and connect USB Data cable;
  •  Make sure Nokia Lumia 520 is selected in the list of models;
  •  If you use only battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
.
nokia_lumia_520

RIFF JTAG – Easy boot repair Samsung GT-i9195 Galaxy S4 Mini LTE (Samsung Serrano) supported

12.10.2013   RIFF JTAG – Easy boot repair Samsung GT-i9195 Galaxy S4 Mini LTE (Samsung Serrano) supported

Repairing bricked Samsung I9195 is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect Samsung I9195:

  •  Solder JTAG cable to Samsung I9195 JTAG pads;
  •  Connect USB cable or insert battery;
  •  Make sure Samsung I9195 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
samsung_galaxy_s_4_mini_4

RIFF JTAG – Easy boot repair Samsung SGH-T999L Galaxy S III LTE supported

12.10.2013  RIFF JTAG – Easy boot repair Samsung SGH-T999L Galaxy S III LTE supported

Repairing bricked Samsung T999L is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung T999L:

  •  Solder JTAG cable to Samsung T999L JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung T999L is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
samsung_gt-i9300_galaxy_s_iii_2