RIFF JTAG – Easy repair HTC ONE M7 PN0713000 supported

Repairing bricked HTC OneM7 (PN0713000) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.54.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PN0713000’.

To resurrect HTC OneS:

•  Solder JTAG cable to HTC OneM7 (PN0713000) JTAG pads;
•  Insert USB Data cable into board and PC;
•  Make sure HTC OneM7 (PN0713000) is selected in the list of models;
•  If you use battery, press Power On key;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

RIFF JTAG – Easy repair HTC Desire 601 LTE (HTC Zara) supported

Repairing bricked HTC Desire 601 (04PE21000) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 2.20.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘04PE21000’.

To resurrect HTC OneS:

•  Solder JTAG cable to HTC Desire 601 (04PE21000) JTAG pads;
•  Insert USB Data cable into board and PC;
•  Make sure HTC Desire 601 (04PE21000) is selected in the list of models;
•  If you use battery, press Power On key;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

RIFF JTAG – Easy repair INNOS D9C supported

Repairing bricked Innos D9C is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect Innos D9C:

•  Solder JTAG cable to Innos D9C JTAG pads;
•  Insert USB Data cable into board and PC;
•  Make sure Innos D9C is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – Easy repair Samsung  GT-i8262D Galaxy Core Duos supported

Repairing bricked Samsung I8262D is easy with the RIFF Box.

To resurrect Samsung I8262D:

•  Solder JTAG cable to Samsung I8262D JTAG pads;
•  Connect Samsung I8262D tablet’s charger for power;
•  Make sure Samsung I8262D is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – Easy repair HTC Desire 500 0P3Z11200 supported

Repairing bricked HTC Desire 500 (0P3Z11200) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.01.0001 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘0P3Z11200’.

To resurrect HTC Desire 500 (0P3Z11200):

•  Solder JTAG cable to HTC Desire 500 (0P3Z11200) JTAG pads;
•  Insert USB Data cable into board and PC;
•  Make sure HTC Desire 500 (0P3Z11200) is selected in the list of models;
•  If you use battery, press Power On key;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

RIFF JTAG – Easy repair Samsung SGH-T699 Galaxy S Relay 4G / Blaze Q supported

Repairing bricked Samsung T699 is easy with the RIFF Box.
There is some kind of anti-downgrade protection implemented in this model. Thus You have to resurrect your phone with the firmware version not lower than the one the phone had before being killed. For this, during resurrection You can select firmware version to be used as resurrection data.
In case there is even more newer firmware available which is not yet included into current DLL, You can always use eMMC Plugin to manually flash boot partitions into your phone. For this, click plugin’s the ‘Load Layout from Device’ button and then use ‘Inject Data from File…’ mouse righ clicks to inject boot files from firmware You have into the proper partitions (SBL1, SBL2, SBL3, RPM, TZ and ABOOT) and then flash them back to phone.

To resurrect Samsung T699:

•  Solder JTAG cable to Samsung T699 JTAG pads;
•  Connect USB cable or instert batteryu;
•  Make sure Samsung T699 is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, You can flash it using known flashing methods.
.

RIFF JTAG – Easy repair Orange Nivo 7560U supported

Resurrecting the Orange Nivo 7560U is easy.

To resurrect the Orange Nivo 7560U:

•  Solder JTAG cable to Orange Nivo 7560U JTAG pads;
•  Solder the Power Button to ground;
•  Connect power supply 4.2V to the battery connectors;
•  Make sure Orange Nivo 7560U is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – Easy repair Huawei Ascend Y300-0100 U8833 (Huawei Asura) supported

Repairing bricked Huawei Y300 is easy with the RIFF Box.

To resurrect Huawei Y300:

•  Solder JTAG cable to Huawei Y300 JTAG pads;
•  Connect Huawei Y300 tablet’s charger for power;
•  Make sure Huawei Y300 is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – Easy repair Huawei UML397 4G LTE™ Wireless Modem supported

Repairing bricked Huawei UML397 is easy with the RIFF Box

To resurrect Huawei UML397:

•  Solder JTAG cable to Huawei UML397 JTAG pads;
•  Insert USB Data cable into board and PC;
•  Make sure Huawei UML397 is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – Easy repair HTC Desire 500 506e (HTC Z4) supported

Repairing bricked HTC Desire 500 (0P3Z10000) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.01.0001 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘0P3Z10000’.

To resurrect HTC Desire 500 (0P3Z10000):

•  Solder JTAG cable to HTC Desire 500 (0P3Z10000) JTAG pads;
•  Insert USB Data cable into board and PC;
•  Make sure HTC Desire 500 (0P3Z10000) is selected in the list of models;
•  If you use battery, press Power On key;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.