RIFF JTAG – Easy repair Samsung Galaxy Rugby Pro I547 supported

Repairing bricked Samsung I547 is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect Samsung I547:

•  Solder JTAG cable to Samsung I547 JTAG pads;
•  Connect USB cable to phone and PC;
•  Insert battery;
•  Make sure Samsung I547 is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold ‘Volume Down’ key and press Power-On.

.

RIFF JTAG – Easy repair Nokia Lumia 625 supported

Repairing bricked Nokia Lumia 625 is easy with the RIFF Box.

To resurrect Nokia Lumia 625:

•  Solder JTAG cable to Nokia Lumia 625 JTAG pads;
•  Insert batter and connect USB Data cable;
•  Make sure Nokia Lumia 625 is selected in the list of models;
•  If you use only battery, press Power On key;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
.

RIFF JTAG -Easy repair Samsung Galaxy Trend Lite S7390 supported

Repairing bricked Samsung S7390 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect Samsung S7390:

•  Solder JTAG cable to Samsung S7390 JTAG pads;
•  Insert USB Data cable into board and PC;
•  Make sure Samsung S7390 is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold ‘Volume Down’ and ‘OK’ keys and press Power-On. And after you see the warning message press ‘Volume Up’ key to enter Download Mode.

.

RIFF JTAG – Easy repair Samsung Rugby Smart I847 supported

Repairing bricked Samsung I847 is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Please note, MSM8255T is dual core chipset – it has ARM11 and Qualcomm Scorpion cores. During power on sequence only ARM11 core is visible on the JTAG chain. If boots are not completely damaged and it comes up to initializing of the Scorpion core then Scorpion core appears on the JTAG chain too. This will shift ARM11 from TAP0 into TAP1 position on the chain, while current resurrector has the ARM11 core hardcoded at TAP0 position. Thus make sure to establish JTAG connection in the time range while Scorpion core is not visible yet.

To resurrect Samsung I847:

•  Solder JTAG cable to Samsung I847 JTAG pads;
•  Make sure Samsung I847 is selected in the list of models;
•  Insert battery and connect USB Data cable;
•  If you use only battery, press Power On key;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

RIFF JTAG – Easy repair ZTE Turkcell T40 supported

Repairing bricked ZTE T40 is easy with the RIFF Box.

To resurrect ZTE T40:

•  Solder JTAG cable to ZTE T40 JTAG pads;
•  Connect ZTE T40 tablet’s charger for power;
•  Make sure ZTE T40 is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

RIFF JTAG – Easy repair Archos 50 Platinium supported

Repairing bricked Archos 50 Platinum is easy with the RIFF Box.

To resurrect Archos 50 Platinum:

•  Solder JTAG cable to Archos 50 Platinum JTAG pads;
•  Make sure Archos 50 Platinum is selected in the list of models;
•  If you use battery, press Power On key;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – Easy boot repair Samsung GT-i9195L Galaxy S4 Mini LTE (Samsung Serrano) supported

Repairing bricked Samsung I9195L is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect Samsung I9195L:

•  Solder JTAG cable to Samsung I9195L JTAG pads;
•  Connect USB cable or insert battery;
•  Make sure Samsung I9195L is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

RIFF JTAG – Samsung GT-i8190L Galaxy S III Mini Unbrick – Dead boot repair supported

Repairing bricked Samsung I8190L is easy with the RIFF Box.
Please note, USB cable must be either disconnected or connected to PC. Charger is not allowed. In order to establish connection, insert battery and press Power On.
Problem to establish JTAG connection means the device is dead up to the loader which enables JTAG. In this case phone must be detected via USB cable as “U8500 USB ROM”. Please install drivers which are located in JTAG Manager “Drivers\NTU8500” folder, leave USB cable connected and start resurrection again.

To resurrect Samsung I8190L:

•  Solder JTAG cable to Samsung I8190L JTAG pads;
•  Attach battery and connect USB cable;
•  Make sure Samsung I8190L is selected in the list of models;
•  Click Resurrect button;
•  If required, press Power On key;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

RIFF JTAG Manager v1.56 – Create Your own repair packages !

JTAG Manager 1.56

• Added Repair Packs functionality: allows customers to create own resurrectors.
• Advanced RIFFBOX customers will be able to create own repair modules for local use only, while RIFFBOX customers with special permissions will be able to distribute own repair packs to all RIFFBOX users.
• Updates list is re-organized:
  1. added feature to sort updates by name and by date,
  2. updates not browsed by user are marked with bold font for more convenient distinguish of old/new files,
  3. added update files tree view – update files are classified by folders for better convenience,
  4. search file name feature is added: press CTRL+F to open Instant Search window.
• Timeout if user was deciding which update files to download for too long time is fixed, now there is no timeout,
• User can do selecting files before clicking Download button for as long time as he wishes.
• Leading and trailing spaces are removed automatically from login name during registration
  .

.

.


You can update JTAG Manager by clicking “Check for Updates” button.

RIFF JTAG – Easy repair Karbonn S5 Titanium supported

Repairing bricked Karbonn S5 is easy with the RIFF Box.

To resurrect Karbonn S5:

•  Solder JTAG cable to Karbonn S5 JTAG pads;
•  Make sure Karbonn S5 is selected in the list of models;
•  If you use battery, press Power On key;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

.