02.09.2010 Samsung I5700 Galaxy Lite Unbrick/Repair dead boot supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_i5700_PDA.dll” contains pinout, repair instructions and required files for single click Samsung I5700 Galaxy Lite Unbrick/Repair dead boot.
02.09.2010 Samsung WAVE Single Click Unbrick/Repair dead boot released
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_S8500.dll” contains pinout, repair instructions and required files for single click Samsung WAVE S8500 Unbrick/Repair dead boot.
02.09.2010 HTC HD2 LEO Direct Unlock supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_HD2.dll” contains pinout, repair instructions and required repair files for direct HTC HD2 LEO unlock, unbrick and IMEI repair.
02.09.2010 Samsung GT-S5230 Hello Kitty Unbrick/Repair dead boot released
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_S5230.dll” contains pinout, repair instructions and required repair files for all versions of GT-S5230 Samsung (M, W, T, Hello Kitty)
02.09.2010 JTAG Manager v1.14 released
Whats new:
JTAG Manger 1.14
———————
– Increased internal buffers size to support NAND devices with 4KB/256KB Page/Block size which makes possible now to run Samsung S8500 fully functional resurrector;
– Added OneNAND 2K/4K pages size selection for DCC Loader setup in Custom Target Settings mode; (make sure you use latest OneNAND standalone DCC loaders; old OneNAND loaders may not start on the 1.14 JTAG Manager version);
– Fixed: now OneNAND settings (in DCC Loader Settings) are not discarded to defaults on next software startup.
– Improved presets loading sequence; – (SDK): exported new SUB_ID_SET_JTAG_SPEED function for resurrectors; Please click “Check for updates” button to download new version.
31.08.2010 Samsung WAVE S8500 Unbrick/Repair boot beta support
This is beta test, and it is not available trough “Check for updates” button.
What You need to repair it ?
– RIFF Box
– Micro USB Cable
– Full charged battery (4.2v)
– CMM + ELF
– Samsung_S8500_PDA.dll
– Pinout
– Multiloader
– USB Drivers
– Firmware files
Procedure:
– Solder RIFF JTAG cable (use very thin wires for PCB, because of battery)
– Insert battery
– Connect Micro USB cable to phone and PC port
– Start the JTAG Manager and select Samsung S8500 PDA from the list
– Switch to “DCC Read/Write” TAB
– Set everything as on photo bellow:
– Press “Read memory” and wait to be finished
– Now switch to “JTAG Read/Write” TAB and press “Connect&Get ID” then “Halt the Target” buttons
– Click “Execute Script” and select CMM file
– Press “Run Script” button
– Ram loader will be uploaded and after its uploaded, phone will automaticaly enter download mode, and detected by PC
– IMPORTANT ! ! ! Now You must disconnect JTAG Cable from RIFF Box
– Start Multiloader 5.62, set “Boot change” and select Boot files folder
– Press download – and wait for process to be finished
– Now phone contains valid bootloader, and can be flashed, so You can desolder JTAG wires from PCB
To enter download mode hold LOCK+Volume Down + Power on Keys.
Problems which You may have:
– Target not detected – check all wires and tp, check battery, 4.2v is a MUST !
– Wrong DCC answer – low battery, or TCK too high, You can use 100KHz TCK too !
– “It not work” – no idea about this lol 
28.08.2010 ZTE MF628 broadband modem unbrick/repair updated
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_MF628.dll” contains pinout, repair instructions and required repair files for ZTE MF628 broadband modem unbrick/repair.
28.08.2010 ZTE MF622 broadband modem unbrick/repair updated.
– Fixed bug with DCC loader, added help and test point image.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_MF622.dll” contains pinout, repair instructions and required repair files for ZTE MF622 broadband modem unbrick/repair.
27.08.2010 HUawei E1550 broadband modem unbrick/repair updated
– Now resurrector contains both 64MB and 128MB repair firmware data And deletrmines 64 or 128MB modem version automatically – thus it flashes valid firmware.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_E1550.dll” contains pinout, repair instructions and required repair files for Huawei E1550 broadband modem unbrick/repair.
27.08.2010 Samsung z240 Unbrick/Repair dead boot supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_Z240.dll” contains pinout, repair instructions and required repair files for Samsung Z240 phone.
