RIFF JTAG – ZTE Skate Unbrick – Dead boot repair supported

Posted on by

29.03.2013 RIFF JTAG – ZTE Skate Unbrick -Dead boot repair supported

Repairing bricked ZTE SKATE is easy with the RIFF Box.

To resurrect ZTE SKATE:

  •  Solder JTAG cable to ZTE SKATE JTAG pads;
  •  Connect ZTE SKATE tablet’s charger for power;
  •  Make sure ZTE SKATE is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
zte_skate