RIFF JTAG – QUALCOMM QSC60XX Generic NOR DLL-s

Posted on by

Resurrector QSC60XX L24 D08 contains only DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.
Embedded DCC Loader is designed to work inside of MCU’s internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.

Initial H/W init sequence will setup MCU’s PLL with these parameters:

  • L/M/N = 0x2A/0x00/0x01;
  • Global Clock Divisor = DIV8

Resurrector QSC60XX L24 D08 contains only DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.
Embedded DCC Loader is designed to work inside of MCU’s internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.

Initial H/W init sequence will setup MCU’s PLL with these parameters:

  • L/M/N = 0x2A/0x00/0x01;
  • Global Clock Divisor = DIV8

You can use these two DLL-s with all QSC6xxx CPU devices with NOR flash.
(Any CDMA phones with Qualcomm QSC60xx CPU, with NOR flash chip)