RIFF JTAG – LG SU630 Unbrick – Dead boot repair supported

Posted on by

13.02.2013  RIFF JTAG – LG SU630 Unbrick – Dead boot repair supported

Resurrecting LG SU630 is very easy but it requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).

To resurrect LG SU630:

  •  Solder JTAG cable to LG SU630 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG SU630 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
su630_k