RIFF JTAG – LG P705 Optimus L7 / P700 Unbrick – Dead Boot Repair Supported

Posted on by

16.10.2012   RIFF JTAG – LG P705 Optimus L7 / P700 Unbrick – Dead Boot Repair Supported

Repairing bricked LG P705 is easy with the RIFF Box. It requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).

To resurrect LG P705:

  •  Solder JTAG cable to LG P705 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG P705 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.