RIFF JTAG – Huawei U8800 Pro Unbrick – Dead boot repair supported

Posted on by

27.11.2012 RIFF JTAG – Huawei U8800 Pro Unbrick – Dead boot repair supported

Repairing bricked Huawei U8800 PRO is easy with the RIFF Box.

To resurrect Huawei U8800 PRO:

  •  Solder JTAG cable to Huawei U8800 PRO JTAG pads;
  •  Connect Huawei U8800 PRO tablet’s charger for power;
  •  Make sure Huawei U8800 PRO is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.