RIFF JTAG – Easy repair Samsung GT-S6310 Galaxy Young supported

Repairing bricked Samsung S6310 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect Samsung S6310:

•  Solder JTAG cable to Samsung S6310 JTAG pads;
•  Insert USB Data cable into board and PC;
•  Make sure Samsung S6310 is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.