RIFF JTAG – Easy repair HUAWEI Ascend G600 (U8950-1) supported

Repairing bricked Huawei U8950-1 is easy with the RIFF Box.

To resurrect Huawei U8950-1:

•  Solder JTAG cable to Huawei U8950-1 JTAG pads;
•  Connect Huawei U8950-1 tablet’s charger for power;
•  Make sure Huawei U8950-1 is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;
•  Copy ‘dload’ folder from firmware update package to SD card root;
•  Insert SD card into the SD slot;
•  Insert battery;
•  Hold both ‘Volume Down’ and ‘Volume up’ keys and press Power-On.

.