RIFF JTAG – Easy repair Gigabyte GSmart Rio R1 supported

Repairing bricked Gigabyte Rio R1 is easy with the RIFF Box.

To resurrect Gigabyte Rio R1:

•  Solder JTAG cable to Gigabyte Rio R1 JTAG pads;
•  Connect USB cable or insert battery;
•  Make sure Gigabyte Rio R1 is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.