20.12.2011 CDMA Haier C301R supported
Resurrecting Haier C301R is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x00EC/0x257E
To resurrect Haier C301R:
- Solder JTAG cable to Haier C301R JTAG pads;
- Insert USB Data cable into board and PC;
- Make sure Haier C301R is selected in the list of models;
- Click Resurrect button;
- Choose which areas to flash;
- Wait till software signals a successful operation completion;
- De-solder JTAG wires;