Author Archives: admin

RIFF JTAG – Samsung Exynos 4412 QUADCORE Supported

Posted on by

09.03.2013 RIFF JTAG – Samsung Exynos 4412 QUADCORE Supported

Resurrector Exynos4412 eMMC0 contains only DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager, or with eMMC Plugin.
DCC Loader expects eMMC memory to be connected to the SDCC controller #0.

Please note that only nonsecured MCU-s will work (DBGEN=1). In case that MCU is secured, HALT operatoion will fail with error 0x44.

Exynos-4412

RIFF JTAG – LG Optimus LTE Tag F120L Unbrick – Dead boot repair supported

Posted on by

09.02.2013  RIFF JTAG – LG Optimus LTE Tag F120L Unbrick – Dead boot repair supported

Repairing bricked LG F120L is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG F120L:

  •  Solder JTAG cable to LG F120L JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG F120L is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
lg_optums_lte_tag

RIFF JTAG – LG Optimus LTE Tag F120K Unbrick – Dead boot repair supported

Posted on by

09.03.2013 RIFF JTAG – LG Optimus LTE Tag F120K Unbrick – Dead boot repair supported

Repairing bricked LG F120K is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG F120K:

  •  Solder JTAG cable to LG F120K JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG F120K is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
lg_optums_lte_tag

RIFF JTAG – Pantech Vega Racer IM-A770K Unbrick – Dead boot repair supported

Posted on by

09.03.2013 RIFF JTAG – Pantech Vega Racer IM-A770K Unbrick – Dead boot repair supported

Repairing bricked Pantech A770K is easy with the RIFF Box.

To resurrect Pantech A770K:

  •  Solder JTAG cable to Pantech A770K JTAG pads;
  •  Insert Pantech A770K into any USB port for power;
  •  Make sure Pantech A770K is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

.
pantech_vega_racer

RIFF JTAG – Pantech Vega LTE M IM-A810S SKYG – Unbrick – Dead boot repair supported

Posted on by

09.03.2013 RIFF JTAG – Pantech Vega LTE M IM-A810S SKYG – Unbrick – Dead boot repair supported

Repairing bricked Pantech A810S is easy with the RIFF Box.

To resurrect Pantech A810S:

  •  Solder JTAG cable to Pantech A810S JTAG pads;
  •  Insert Pantech A810S into any USB port for power;
  •  Make sure Pantech A810S is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

.
pantech_vega_lte_im-a810s_2

RIFF JTAG – Vodafone 858 Smart (Huawei U8160) Unbrick – Dead boot repair supported

Posted on by

22.02.2013   RIFF JTAG – Vodafone 858 Smart (Huawei U8160) Unbrick – Dead boot repair supported

Resurrecting Huawei U8160 is simple.
Connection can be established with charger connected while battery is inside.

To resurrect Huawei U8160:

  •  Solder JTAG cable to Huawei U8160 JTAG pads;
  •  Connect Huawei U8160 tablet’s charger for power;
  •  Make sure Huawei U8160 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.
huawei_858_smart_2

RIFF JTAG – LG P930 Nitro HD Unbrick – Dead boot repair supported

Posted on by

22.02.2013  RIFF JTAG – LG P930 Nitro HD Unbrick – Dead boot repair supported

Repairing bricked LG P930 is easy with the RIFF Box. The device is based on the Qualcomm APQ8060 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG P930:

  •  Solder JTAG cable to LG P930 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG P930 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

lg_nitro_hd

RIFF JTAG – Pantech Vega R3 IM-A850L Unbrick – Dead boot repair supported

Posted on by

21.02.2013  RIFF JTAG – Pantech Vega R3 IM-A850L Unbrick – Dead boot repair supported

Repairing bricked Pantech A850L is easy with the RIFF Box.

To resurrect Pantech A850L:

  •  Solder JTAG cable to Pantech A850L JTAG pads;
  •  Insert Pantech A850L into any USB port for power;
  •  Make sure Pantech A850L is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Up’ and ‘Volume Down’ keys and press Power-On. After phone has entered Boot menu, select ‘PDL Download’ to set Software Upgrading Mode.

.
pantech_vega_r3_2

RIFF JTAG – Pantech Vega R3 IM-A850K Unbrick – Dead boot repair supported

Posted on by

21.02.2013  RIFF JTAG – Pantech Vega R3 IM-A850K Unbrick – Dead boot repair supported

Repairing bricked Pantech A850K is easy with the RIFF Box.

To resurrect Pantech A850K:

  •  Solder JTAG cable to Pantech A850K JTAG pads;
  •  Insert Pantech A850K into any USB port for power;
  •  Make sure Pantech A850K is selected in the list of models;
  •  Click Resurrect button;
  •  Select areas to be repaired in the settings window;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Up’ and ‘Volume Down’ keys and press Power-On. After phone has entered Boot menu, select ‘PDL Download’ to set Software Upgrading Mode.

.

pantech_vega_r3_2

RIFF JTAG – Samsung GT-P3113 Galaxy Tab 2 7.0 Unbrick – Dead boot repair supported

Posted on by

21.02.2013  RIFF JTAG – Samsung GT-P3113 Galaxy Tab 2 7.0 Unbrick – Dead boot repair supported

Samsung P3113 is based on the OMAP4430 Processor (Cortex-A9 Dual-Core). JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.
Please note: The initial loader in the Samsung P3113 is XLOADER. Due to OMAP4430’s some peculiar TrustZone security features current resurrector will boot only in case XLOADER is alive. That’s why model name of current resurrector has additional text: ‘XLoader+’. In case XLOADER is damaged (which happens for example after wrong firmware reflash), you will have to use different resurrector DLL – the one with the ‘XLoader-” delimiter.

To resurrect Samsung P3113:

  •  Solder JTAG cable to Samsung P3113 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung P3113 is selected in the list of models;
  •  Make sure a fixed TCK frequency is selected;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

samsung_galaxy_tab_2_70_2