Author Archives: admin

RIFF JTAG – Easy boot repair LG F220K (Optimus GK) supported

Posted on by

12.10.2013  RIFF JTAG – Easy boot repair LG F220K (Optimus GK) supported

Repairing bricked LG F220K with the RIFF Box requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect LG F220K:

  •  Solder JTAG cable to LG F220K JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG F220K is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
5LG-F220K-Optimus-GK-Android-4.2-5.0-inch-smart-phones

RIFF JTAG – Easy repair LG F200K Optimus Vu II supported

Posted on by

12.10.2013  RIFF JTAG – Easy repair LG F200K Optimus Vu II supported

Repairing bricked LG F200K is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG F200K:

  •  Solder JTAG cable to LG F200K JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG F200K is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
lg_optimus_vu_ii_2

RIFF JTAG – Easy repair Huawei Honor (Huawei U8860) supported

Posted on by

12.10.2013  RIFF JTAG – Easy repair Huawei Honor (Huawei U8860) supported

Repairing bricked Huawei U8860 is easy with the RIFF Box.

To resurrect Huawei U8860:

  •  Solder JTAG cable to Huawei U8860 JTAG pads;
  •  Connect Huawei U8860 tablet’s charger for power;
  •  Make sure Huawei U8860 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
huawei_u8860

RIFF JTAG – Easy repair HTC One 802d supported

Posted on by

05.10.2013   RIFF JTAG – Easy repair HTC One 802d supported

Repairing bricked HTC One802 Dual (PN0771000) is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 2.24.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID may be re-flashed too. In this case after resurrection the phone will have Model ID = ‘PN0771000’.

To resurrect HTC One802 Dual (PN0771000):

  •  Solder JTAG cable to HTC One802 Dual (PN0771000) JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure HTC One802 Dual (PN0771000) is selected in the list of models;
  •  If you use battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.
htc_802d

RIFF JTAG – Easy repair Huawei Ascend W1-U00 supported

Posted on by

05.10.2013  RIFF JTAG – Easy repair Huawei Ascend W1-U00 supported

Repairing bricked Huawei W1-U00 is easy with the RIFF Box.

To resurrect Huawei W1-U00:

  •  Solder JTAG cable to Huawei W1-U00 JTAG pads;
  •  Connect Huawei W1-U00 tablet’s charger for power;
  •  Make sure Huawei W1-U00 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Copy ‘dload’ folder from firmware update package to SD card root;
  •  Insert SD card into the SD slot;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Volume up’ keys and press Power-On.

.
huawei_ascend_w1

RIFF JTAG – Easy repair LG E988 Optimus G Pro 5.5 4G LTE supported

Posted on by

05.10.2013   RIFF JTAG – Easy repair LG E988 Optimus G Pro 5.5 4G LTE supported

Repairing bricked LG E988 with the RIFF Box requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).
Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted. Please note, battery must be charged. If battery is not charged enough there is chance of getting 0x42 error during connection stage.

To resurrect LG E988:

  •  Solder JTAG cable to LG E988 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG E988 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods

To enter emergency mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume down’ and ‘Camera’ keys and press ‘Power ON’ button.

.
lg_e989_optimus_g_pro

RIFF JTAG – Easy repair LG LU6200 Optimus LT supported

Posted on by

05.10.2013   RIFF JTAG – Easy repair LG LU6200 Optimus LT supported

Repairing bricked LG LU6200 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG LU6200:

  •  Solder JTAG cable to LG LU6200 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG LU6200 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
lg_lu6200

RIFF JTAG – Easy repair LG P715 Optimus L7 II Dual supported

Posted on by

05.10.2013  RIFF JTAG – Easy repair LG P715 Optimus L7 II Dual supported

Repairing bricked LG P715 is easy with the RIFF Box. But it requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).

To resurrect LG P715:

  •  Solder JTAG cable to LG P715 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure LG P715 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.
lg_p715_optimus_l7_ii

RIFF JTAG – Easy repair LG VS840 Lucid 4G (LG Cayman) supported

Posted on by

05.10.2013   RIFF JTAG – Easy repair LG VS840 Lucid 4G (LG Cayman) supported

Repairing bricked LG VS840 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on.

To resurrect LG VS840:

  •  Solder JTAG cable to LG VS840 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure LG VS840 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original LG downloader software to restore it to the working state.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

.
lg_ls840_lucid_4g