RIFF JTAG – HTC Desire Eye 4G LTE EMEA M910n Boot repair supported

Posted on by

Repairing bricked HTC Desire M910n (0PFH11000) via ISP connection is easy with the RIFF Box.
Additionally to HBOOT and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘0PFH11000’.

To resurrect HTC Desire M910n (0PFH11000) via ISP connection:

  • Get access to HTC Desire M910n (0PFH11000) board (PCB);
  • Check schematics picture for solder positions of CLK, DAT0, CMD and GND signals;
  • Remove (de-solder) the CLK resistor;
  • Solder CLK, DAT0, CMD and GND wires to the specified pads on the PCB;
  • Attach battery
  • Connect USB Data cable;
  • Make sure HTC Desire M910n (0PFH11000) ISP is selected in the list of models;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • Disconnect USB cable and battery, de-solder wires and solder back the CLK resistor;

Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
.