RIFF JTAG – Easy repair CDMA ZTE S183 supported

Posted on by

RIFF JTAG – Easy repair CDMA ZTE S183 supported

Resurrecting ZTE S183 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x017E/0x0063.

To resurrect ZTE S183:

  •  Solder JTAG cable to ZTE S183 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure ZTE S183 is selected in the list of models;
  •  Click Resurrect button;
  •  Choose which areas to flash;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;

.
S183