RIFF JTAG – Easy repair Samsung GT-S7560M Galaxy Ace II X supported

Posted on by

RIFF JTAG – Easy repair Samsung GT-S7560M Galaxy Ace II X supported

Repairing bricked Samsung S7560M is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect Samsung S7560M:

  •  Solder JTAG cable to Samsung S7560M JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Samsung S7560M is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

.
samsung-gt-s7560m-full-1